What did you do to your NNBS GMT900 Tahoe/Yukon Today?
- Thread starter phattyford
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Sparksalot
Supporting Member
When I first moved to Texas, open containers were legal. A year later, the law changed to legal for all except the driver.
Then two years after the drinking age went from 19 to 21. Thankfully i had already turned 21.
Sparksalot
Supporting Member
What's a PPV like to drive you ask?
On a rural road with minor washboard.
Off road near Big Bend.
On a rural road with minor washboard.
Off road near Big Bend.
Sparksalot
Supporting Member
Who you calling’ young, sport?Who is that handsome young man in the mirror?
R3cord303
Posse In Effect
The H3 mounts are awesome. There is some vibration but way less than the stock ones after all the oil leaks out.
George B
¯\_(ツ)_/¯
Thinking on replacing battery cables. I think I have some nice welder cable up in the attic. What you all using for battery end terminals. I don’t like the stupid two bolt clamp ones. The negative terminal on mine is a right angle one too.
kbuskill
***CAUTION*** I do my own stunts!
I built my own cables out of 2/0 Marine grade tinned copper shielded cable and soldered copper lugs on the ends with marine grade (it has a heat activated glue inside) heat shrink. I did what is referred to as "the big 3" upgrade.
I used these terminals and soldered them on...
I guess it depends on your battery though. Mine has side and top posts.
The 2/0 is definitely overkill but I found a good deal on it.
Tonyrodz
Resident Resident
Nice work.
Sparksalot
Supporting Member
What is the big 3 upgrade?
Similar threads
