wjburken
Latest activity Postings About
-
-
Well all, new one to me. Drove all over the place today with several stops. Got home and parked in the driveway to empty the truck. Got... -
I don’t have any ideas other than the ignition switch like Fless mentioned Bob but I just wanted to wish you luck in figuring this out...
-
wjburken replied to the thread What brand name oil.Well…..since the OP was last seen here 4 minutes after starting this thread, I’m guessing they lost interest.
-
that's because of the "floating axle" the panhard bar & lowering equipment used, weight of the gas tank, tires and probably some other...
-
wjburken reacted to 11bravo's post in the thread New compressor and bags...easier with suspension hanging free? with
Like.
You are a glutton for punishment! I'm skinny, and I won't go under there without ramps or a jack+ stands. Regardless of that, your... -
wjburken reacted to Joseph Garcia's post in the thread New compressor and bags...easier with suspension hanging free? with Like.
You've been given great advice from the folks above. I've done it on my 07 Yukon XL Denali, and it is a fairly straightforward...
-
wjburken reacted to petethepug's post in the thread New compressor and bags...easier with suspension hanging free? with Like.
Beware, these GM with AWD have an open diff. If the rear is jacked up, THE TRUCK WILL ROLL if on an incline whether in P or not. Block...
-
wjburken replied to the thread New compressor and bags...easier with suspension hanging free?.for me, the only reason to raise the rear end up is so my fat àss can fit under there. No need to hang the rear axle loose for shocks...
-
Welcome to the Forum from NH. Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives...
-
wjburken replied to the thread What brand name oil.Welcome to the forum from Iowa. Might do a quick search here. I’m sure you’ll find more information and opinions than you ever...
-
wjburken replied to the thread 2013 ssv suspension help.Agree that RockAuto is optimistic pricing and yes, the shop would put margin on top of what they pay. I have had a number of...
-
I doubt that a shop would match Rock Auto's prices, but maybe they let you bring your own parts. Some shops won't do the work unless...
-
wjburken replied to the thread 2013 ssv suspension help.What you shared, the hours add up to 8 hours just for the arms and at a $180/hr shop rate, which seems to be average these days, that’s...
-
wjburken replied to the thread Longer Front Shocks.How long are the extenders? That should give you an idea how much “lift” is there due to cranking the keys. I’ve never seen just...
-
wjburken reacted to Doubeleive's post in the thread What did you do to your NNBS GMT900 Tahoe/Yukon Today? with Like.
Had no idea Walmart did headlight restoration for $26 out the door, until last night. Came out pretty good I guess
-
-
Loading…
-
Loading…
