2012 Rear Escalade Bumper With Dual Tips - Part numbers

[dnme305]

I have magna flow exhaust on my truck would I have to swap that out? I don't mind eliminating the spare tire.

 

[THE YETI]

I have magna flow exhaust on my truck would I have to swap that out? I don't mind eliminating the spare tire.

No. Just need to run a y-pipe and lose your magnaflow tip.

 

[dnme305]

No. Just need to run a y-pipe and lose your magnaflow tip.

thanks is your shop in Weston, FL?

---------- Post added at 10:28 PM ---------- Previous post was at 10:26 PM ----------

Nvmnd yes it is... Im prob 10 min from the shop..do you guys install as well as exhaust work?

 

[THE YETI]

thanks is your shop in Weston, FL?

---------- Post added at 10:28 PM ---------- Previous post was at 10:26 PM ----------

Nvmnd yes it is... Im prob 10 min from the shop..do you guys install as well as exhaust work?

I can personally do it, sure. But the exhaust work a shop would do.

 

[spotted_giraffe]

I just read over this thread quickly at work, so I may have missed it. It might also be a stupid question. Will this work on a 2010 EXT?

 

[Ben]

yes, but no spare tire.

 

[spotted_giraffe]

Awesome. Thank you

 

[THE YETI]

I just read over this thread quickly at work, so I may have missed it. It might also be a stupid question. Will this work on a 2010 EXT?

No it will not work with an EXT.

 

[spotted_giraffe]

Damn. That pissed on my parade. It's probably obvious, but can I ask why?

 

[NathanJax]

Damn. That pissed on my parade. It's probably obvious, but can I ask why?

because that part of your ext is mirrored to a truck and not a tahoe.

 

[Goodinblack]

Avalanche style

 

[Ben]

Sorry I must of been drunk/. I know it doesnt work lol.

 

[madmanhiker]

quick question on this....... at least for my denali (2014), it states that I would have to remove the spare tire. I don't want to ride without one, that being said, what do other folks do? is there a vertical spare tire mount ability inside the cargo area instead of it just lying flat like a sack of potatoes? Plus, we had to remove the 3rd row because we needed more cargo room for deliveries and groceries. thanks for any advice.

 

[felixgun]

Oem tire repair kit is what the esky with this bumper comes with I think.

 

[madmanhiker]

Oem tire repair kit is what the esky with this bumper comes with I think.

thanks. I see this is a pesky issue even with esky owners. I just had my duals done and I had to run my pipes on one side (because I didn't want to lose the spare.) That being said, I don't like the way it looks, but... if I change the rear to esky duals, I lose my spare regardless. arrgh

http://www.cadillacforums.com/forums/cadillac-escalade-ext-esv-forum-2007/270094-2013-escalade-esv-dual-exhaust-full.html

 

[NathanJax]

quick question on this....... at least for my denali (2014), it states that I would have to remove the spare tire. I don't want to ride without one, that being said, what do other folks do? is there a vertical spare tire mount ability inside the cargo area instead of it just lying flat like a sack of potatoes? Plus, we had to remove the 3rd row because we needed more cargo room for deliveries and groceries. thanks for any advice.

VVV this VVV

Oem tire repair kit is what the esky with this bumper comes with I think.

You can go custom and do an electric hoist (and hope it works when you need it) or people have kept the spare tire, made a hole in the bumper and done a crazy re-route of the exhaust.

 

[KennyK]

Well someone ran into the back of my wife's yukon
So it looks like I will be taking on the challenge of doing this with retaining the spare tire by fabing up my own exhaust and heat shields

 

[THE YETI]

Well someone ran into the back of my wife's yukon
So it looks like I will be taking on the challenge of doing this with retaining the spare tire by fabing up my own exhaust and heat shields

That's not the problem. The problem is the hoist system for the spare and how you're going to access it.

You're better off just installing the tips only into your factory bumper and calling it a day. Cheaper and you'll achieve the same look.

 

[KennyK]

That's not the problem. The problem is the hoist system for the spare and how you're going to access it.

You're better off just installing the tips only into your factory bumper and calling it a day. Cheaper and you'll achieve the same look.

I plan on rotating the hoist so that the access hole is behind the hitch cover
I need a new bumper anyway mine is messed up from the wreck

 

[THE YETI]

Make a new thread too! Would like to see the build.