What did you do to your NNBS GMT900 Tahoe/Yukon Today?

Rocket Man · Jun 20, 2020

Galante said:
There was a member on here that tried to take that ‘stick to the hood kind’ off and it peeled the paint but I think his was on from new, the previous owner.

clear bra, many tint shops do it since it’s like applying tint.

I have the stand-off kind on my hoe and I clear bra’ed the yukon. The standoff is hard to see with the truck being black until you’re on top of the truck.View attachment 250431 View attachment 250432 View attachment 250433 View attachment 250434

I get more damage on my grills and bumpers than my hoods so I’d have to put clear bra on the entire fronts of my trucks. I just don’t worry about it.

George B · Jun 20, 2020

Rocket Man said:
I get more damage on my grills and bumpers than my hoods so I’d have to put clear bra on the entire fronts of my trucks. I just don’t worry about it.

I am sort of leaning this way. And will just touch up when I get a chip.

PG01 · Jun 20, 2020

George B said:
How do you like the clear bra?

completely eased my mind about rock chips, my trucks see a lot of highway travel. Tahoe has chips but not bad. The yukon, i did the expel (I think) so I did full hood, bumper cover, Lights A pillars and a strip on the roof.... truck still looks new and you can’t even tell it’s on there.

Rocket Man said:
I get more damage on my grills and bumpers than my hoods so I’d have to put clear bra on the entire fronts of my trucks. I just don’t worry about it.

I did the full front end on the yukon... lol

Rocket Man · Jun 20, 2020

Galante said:
completely eased my mind about rock chips, my trucks see a lot of highway travel. Tahoe has chips but not bad. The yukon, i did the expel (I think) so I did full hood, bumper cover, Lights A pillars and a strip on the roof.... truck still looks new and you can’t even tell it’s on there.

I did the full front end on the yukon... lol

Never bought anything that didn’t already have chips so meh. If I bought a new vehicle I would do it.

iamdub · Jun 20, 2020

the_tool_man said:
Yeah. At first, they're free. Once we're strung out on diodes, it'll cost us!

At least you won't be all over the place. Your life will be headed in only one direction.

Doubeleive · Jun 20, 2020

Galante said:
I hope this solves it for ya doubie. I don’t know why your truck doesn’t like the rvc... mine is still going strong...... (I just gave it the kiss of death now)

ya, I think the problem was the battery/s but if not my next step will be a new bcm

cmatt · Jun 20, 2020

Removed the cross rails. Eventually, I’ll replace the main rails with ones from a Denali/Escalade.

Sent from my iPhone using Tapatalk

cmatt · Jun 20, 2020

Is the shark fin antenna nut a one time use part? Thinking about removing and painting it.

Sent from my iPhone using Tapatalk

wjburken · Jun 20, 2020

cmatt said:
Is the shark fin antenna nut a one time use part? Thinking about removing and painting it.

Sent from my iPhone using Tapatalk

I would say yes. There is a piece that crushes when it’s installed.

Here is what it looks like underneath.

Rocket Man · Jun 20, 2020

wjburken said:
I would say yes. There is a piece that crushes when it’s installed.

Here is what it looks like underneath.
View attachment 250435

Alldatadiy doesn’t specify to replace it, just torque to 80 in/ lbs. That doesn’t look like it crushes, but instead spreads the force out in a bigger area. So I would say you should be ok to reuse it. It’s just holding pressure against the gasket so as long as it tightens up good and the gasket is held tight it should be good.

What did you do to your NNBS GMT900 Tahoe/Yukon Today?

Rocket Man

Mark

George B

¯\_(ツ)_/¯

PG01

Rocket Man

Mark

iamdub

Full Access Member

Doubeleive

Wes

cmatt

Full Access Member

cmatt

Full Access Member

wjburken

Rocket Man

Mark

Similar threads

Forum statistics

Latest posts