This weekends work...

[PPV12HOE]

Passenger side complete...

 

[PPV12HOE]

Finished... gotta get some new door rubbers for both driver side doors... but that can wait till next weekend...

 

[wjburken]

Finished... gotta get some new door rubbers for both driver side doors... but that can wait till next weekend...

View attachment 231895 View attachment 231896

Impressive progress. Keep it up!

 

[2011SSVHOE]

Looks good you need to access the GM upfitters manual for the wiring diagrams. also check the wire bundle for the RPO code. Then I can help better.

 

[Ilikemtb999]

Is it supposed to look purple?

 

[PPV12HOE]

Is it supposed to look purple?

Lol I hope not... but I see what ya mean looking at the photos... I ordered the factory code 912 which is ebony...

 

[Ilikemtb999]

Must just be the lighting or something

 

[PPV12HOE]

Must just be the lighting or something

Yeah... here's a different pic...

 

[PPV12HOE]

Put my DIC in today... notched the trim and hot glue it into place... think it turned out all right...

 

[PPV12HOE]

Also did my led treatment to all the exterior bulbs today... headlight removal is a pita... over all not a bad day... difference in halogen to led is night and day...

 

[5strmtrp]

On the lighter side.... Sarge I dont know why I'm missing a round... I promise I didnt shoot anybody...

View attachment 231553

Lol! Found the exact same thing in my truck when I took out the drivers seat to replace the bottom seat foam.

Paul

 

[5strmtrp]

Put my DIC in today... notched the trim and hot glue it into place... think it turned out all right...
View attachment 232858

Hmm, so you dremeled out the hole and hot glued it in place. Been looking around to find the trim but all I’ve seen is the wood grain. This just might work! Need to replace the center stack trim as mine is full of holes. Your job looks great

 

[Ilikemtb999]

I did the same thing. Start small and work it out. I used a hot razor blade to get it as clean as possible.

 

[PPV12HOE]

Hmm, so you dremeled out the hole and hot glued it in place. Been looking around to find the trim but all I’ve seen is the wood grain. This just might work! Need to replace the center stack trim as mine is full of holes. Your job looks great

Yup... taped it off, cut it out a lil small, filled it to fit, filed it out some more so the buttons wouldn't stick, then glued it in....

 

[1BADI5]

Also did my led treatment to all the exterior bulbs today... headlight removal is a pita... over all not a bad day... difference in halogen to led is night and day...

View attachment 232860 View attachment 232861 View attachment 232862

Did you change the flasher or install resistors to prevent the hyper flash?

I've done the brake light and reverse bulbs, but nothing that flashes yet

 

[PPV12HOE]

Did you change the flasher or install resistors to prevent the hyper flash?

I've done the brake light and reverse bulbs, but nothing that flashes yet

I didn't replace the flasher or put in resistors... it does hyperflash... it did not with just the rears done but after I installed the fronts it did... it doesn't bother me enough to take them back out but I am gonna try a new flasher and hope it corrects it... thats what I did in my last truck...

 

[1BADI5]

I didn't replace the flasher or put in resistors... it does hyperflash... it did not with just the rears done but after I installed the fronts it did... it doesn't bother me enough to take them back out but I am gonna try a new flasher and hope it corrects it... thats what I did in my last truck...

Cool beans, let me know if the flasher does the job.

I'd like to do LEDs in the turn signals........... I like LEDs LOL

 

[kbuskill]

I didn't replace the flasher or put in resistors... it does hyperflash... it did not with just the rears done but after I installed the fronts it did... it doesn't bother me enough to take them back out but I am gonna try a new flasher and hope it corrects it... thats what I did in my last truck...

Cool beans, let me know if the flasher does the job.

I'd like to do LEDs in the turn signals........... I like LEDs LOL

Unfortunately, the GMT900 trucks DO NOT have a replaceable flasher... it is controlled by the BCM... you have to get it reprogrammed to be compatible with LEDs... basically you disable the "bulb out" warning indicator.

This place can do it...

2007-2014 C/K Truck/SUV Custom BCM Programming – White Automotive & Media Services
https://www.whiteautoandmedia.com/product/2007-2014-c-k-truck-suv-custom-bcm-programming/

 

[PPV12HOE]

Unfortunately, the GMT900 trucks DO NOT have a replaceable flasher... it is controlled by the BCM... you have to get it reprogrammed to be compatible with LEDs... basically you disable the "bulb out" warning indicator.

This place can do it...

2007-2014 C/K Truck/SUV Custom BCM Programming – White Automotive & Media Services
https://www.whiteautoandmedia.com/product/2007-2014-c-k-truck-suv-custom-bcm-programming/

Thanks for the heads up... guess I'll just deal with the hyperflash for a lil while...

 

[PPV12HOE]

Installed my swc for the radio....