What did you do to your NNBS GMT900 Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Geotrash

Dave
Supporting Member
Joined
Feb 16, 2018
Posts
7,845
Reaction score
20,404
Location
Richmond, VA
noise is usually the 1st indication, should be pretty much silent when spinning the wheel while off the ground, next thing would be movement @ 12 & 6, abs errors
Yeah, know that these are the usual symptoms but was just wondering if his actually was exhibiting any of them. It's reassuring to know that it was.
 

iamdub

Full Access Member
Joined
Apr 23, 2016
Posts
20,821
Reaction score
45,012
Location
Li'l Weezyana
You wanna unload it?

Not sure yet! I'm still trying to sort out my drop. I'm actually looking into reinstalling my old and squishy struts for ride quality but bolting them under the control arm to maintain the drop. Honestly, you'll have your stuff finished before I have time to mess with mine.
 

89Suburban

Bull in the china shop
Space X Supporting Member
Joined
Jan 10, 2013
Posts
17,873
Reaction score
50,945
Location
SE PA
Not sure yet! I'm still trying to sort out my drop. I'm actually looking into reinstalling my old and squishy struts for ride quality but bolting them under the control arm to maintain the drop. Honestly, you'll have your stuff finished before I have time to mess with mine.


No prob pal! :)
 

iamdub

Full Access Member
Joined
Apr 23, 2016
Posts
20,821
Reaction score
45,012
Location
Li'l Weezyana
I have a feeling I am being setup. What's the term? Careful what you wish for? He has been walking both sides of the fence lately in his posts.

Lately? You obviously haven't spent enough time on any construction sites.


Might ask me for a reach around or somethong...

Definitely somethong.
 
Joined
Apr 11, 2018
Posts
7,124
Reaction score
14,376
Location
St. Louis
Did absolutely nothing to it today. Too damn hot out.

Current temp in the shade

20220705_132509.jpg
 

Just Fishing

Can't fix stupid
Joined
Aug 30, 2020
Posts
4,506
Reaction score
10,136
Location
Utah
Planning to do some work on the wife's car this weekend.

Ac work, needs a new condenser.
Found a slow leak on the upper passenger side.

I missed this leak last year when i topped off the refrigerant.

I just happened to see some oil wet when pushing a air deflector back into position and decided i better find the source.

I found an aftermarket ac condenser had been installed after some minor front end damage was repaired per the prior/original owner.

It was done by the gm dealer, yet they used an aftermarket upper bumper bracket and ac condenser...

The work looks good otherwise, can't even tell it was hit.

There are a few other things I would like to replace while i have the ac system open.

But they are against the firewall.
And I'm not wanting to fk with that unless i have the intake off.

And if i did that, then it's time to update the valve cover gasket to address aome pcv issues.
And spark plugs + wires while I'm there...

So yeah, probably just going with the ac condenser + oil balance for now.

Something to think about later when i do the actual sparkplugs this fall/winter.
 

Forum statistics

Threads
137,804
Posts
1,992,544
Members
102,792
Latest member
Hodmjstone
Back
Top