Tahoe/Yukon Headlight Information Thread

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

mbp1979

Full Access Member
Joined
Mar 13, 2016
Posts
253
Reaction score
115
Location
North Little Rock
Look good . Those matchbox’s in the highs ? I was too lazy to take the lenses off mine lol. Are you finished with the signal housings ?

Its so easy to remove the lenses you should try the 2015 up model headlights those are ridiculous because of the permaseal. I used matchbox's in the highs id wish I would have put another set of h1's in there but I didn't think they would fit but im almost positive they will but would take alot more work. I should have my signals done in the next couple days sealed them back up but going to go around again and put a good thick layer around the inside. If everyone knew how little is holding them together. The first thing everyone should do is get a tube of gasket maker and go around each lense so the dont leak brand new out the box.
 

05Single

afraid of the dark
Joined
Feb 26, 2015
Posts
8,183
Reaction score
11,447
Its so easy to remove the lenses you should try the 2015 up model headlights those are ridiculous because of the permaseal. I used matchbox's in the highs id wish I would have put another set of h1's in there but I didn't think they would fit but im almost positive they will but would take alot more work. I should have my signals done in the next couple days sealed them back up but going to go around again and put a good thick layer around the inside. If everyone knew how little is holding them together. The first thing everyone should do is get a tube of gasket maker and go around each lense so the dont leak brand new out the box.
If I were to remove the lens I was gonna put a led hi-lens in the high beam spot AEC63626-E3FE-4173-B1B3-3F2486D36387.jpeg
 

05Single

afraid of the dark
Joined
Feb 26, 2015
Posts
8,183
Reaction score
11,447
I got a set of those but the light pattern is way to small for my liking. Its very tight.
It is but combined with the high beam of the H1 I feel like it would cover a lot of ground . Too bad the MLED is so huge . I mean anything would fit with hours of trimming lol
 

mbp1979

Full Access Member
Joined
Mar 13, 2016
Posts
253
Reaction score
115
Location
North Little Rock
Yep ur right I wondering if a morimoto mini d2s would fit in the low beam side Im thinking i may try and put the mini h1 on the high beam side. I bet if that would fit it would look amazing.

Sent from my SM-N960U using Tapatalk
 

05Single

afraid of the dark
Joined
Feb 26, 2015
Posts
8,183
Reaction score
11,447
Yep ur right I wondering if a morimoto mini d2s would fit in the low beam side Im thinking i may try and put the mini h1 on the high beam side. I bet if that would fit it would look amazing.

Sent from my SM-N960U using Tapatalk
It would if you got the skill and time. I know I don’t have the patients lol. And I’m happy with my 7.0s. Anything more would be overkill for my preference. I don’t even like light bars. I am probably going to switch to 8.0s this coming Black Friday, heard it’s a noticeably brighter and wider beam compared to the 7.0
 

05Single

afraid of the dark
Joined
Feb 26, 2015
Posts
8,183
Reaction score
11,447
I did add a red passive demon eye for my morimotos . With the previous acmes I had used dark blue to match the body paint and it wasn’t visible at all. Anyway I’m happy how these turned out. 4F99C9C7-48DB-427C-B847-8C0AE8F1A5F8.jpegC2210301-5ACF-4CC6-B249-37350165A8B5.jpeg53672864-5D45-4A47-9134-61AD0AA0BB3C.jpeg8928C9E5-24BB-4DC9-859A-F0441D1D2354.jpeg977E6409-B17D-457D-A1DA-8B698C25E071.jpeg
 

Forum statistics

Threads
128,781
Posts
1,805,301
Members
91,760
Latest member
MyCleftNut

Latest posts

Top