-
-
After tolerating this for a few years now, I decided to put my mind to it and make it a project. I removed the bucket from the center... -
Maybe bypass your starter relay. This video is for the later NBS series but some of it applies...
-
Did you check the engine block ground wire? The symptoms you are having copy a dirty/corroded/loose/broken battery wire. Check the...
-
nonickatall replied to the thread 1997 7.4l - At my wits end with an irregular miss..I don't know how it is with our cars, but I've never had any problems unscrewing and reattaching drive shafts, regardless of the...
-
nonickatall replied to the thread Truck won't crank.So after dismantling half the car to protect it from rust, I've finally got around to putting everything back together. The tank is in...
-
nonickatall replied to the thread Truck won't crank.Everything disassembled for rust protection.... I'm looking forward to driving my beloved truck again....
-
-
Maybe a easy out from the inside can get enough grip to pull them out
-
dorman sells replacement ends. or maybe you can find the lines for the tank used on ebay or something.
-
nonickatall replied to the thread Truck won't crank.Success. I have the rusty rest of the fuel pump out of the connectors. Took me 3 hours, love, patience and a lot of different tries...
-
nonickatall replied to the thread Truck won't crank.I had three quick connectors that were completely rotten and one that I was able to save after spraying them and handling them...
-
you should be able to pinch the plastic part there with some pliers and pull that rusted tube out. all of them fittings should pinch and...
-
That fuse powers through the contact set of the fuel pump relay straight to the fuel pump. It could be the pump is shorted (Its motor...
-
nonickatall replied to the thread Truck won't crank.I use Fluid Film and Permafilm to protect the car. That has the advantage, that you have a fluid material under the coating, so that...
-
nonickatall replied to the thread Truck won't crank.Thank you very much, that helps a lot. I will check today where I can purchase these in Germany.
-
nonickatall replied to the thread Truck won't crank.Thank you very much for your help anyway. It gave me the crucial clues. I haven't really solved the problem yet, because the wiring...
-
-
Loading…
-
Loading…
