No sir
What did you do to your NNBS GMT900 Tahoe/Yukon Today?
- Thread starter phattyford
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Chevymec
Member
Dropped the tank to replace the fuel pump after 226k miles and replaced the evap lines from a failed canister. Tried getting all the charcoal pellets out of the lines but they just keep coming out. I'm tired of taking 15 minutes to fill up so new lines are on the way.
Was trying to spit polish the engine bay after cleaning all the doors and door jambs and proceeded to break both the windshield wiper fluid hoses off of the shroud, thought I had only broke one but discovered otherwise after fixing one, luckily dorman came to the rescue, guess it's time to order a new shroud if they are even made anymore
the shroud side hole wasn't quit big enough so I just hand reamed it with a small drill bit and it worked out well. I figured there was just hose connected under the shroud but I pulled it up a bit and felt under there and it's a elbow leading to the drivers side so I didn't have to brace it or anything.
Glad you posted this because I was contemplating taking mine off tonight to look for a water leak. Glad I didn't.
Really like that lighting under the cowl setup there though.
a replacement one is about $230, I guess my fix is good for now lol
you can take it off just be carefull those nipples for the washer fluid hose are pretty small I was just wiping really not near them and they snapped right off from a rag
the vacuum line repair kit worked fine luckily.
Sprayed fine afterwards hose didn't pop off or anything, thankfully the rubber hose to the wiper arm is still soft and not all dried out and brittle
mikez71
Full Access Member
- Joined
- Mar 9, 2023
- Posts
- 3,225
- Reaction score
- 3,993
I had to replace one of my washer connectors too. Another reason I wish I had hood mounted nozzles. Rather fix em now before they break on the road.
Here's my underhood lights, couple harbor freight rock lights.
Here's my underhood lights, couple harbor freight rock lights.
HortonHiresAHoe
Full Access Member
I've never seen anything more accurate
I was looking at mine last night. Both the outer screws are missing. Not the ones under the end caps, the exposed ones.
C'mon rookie JFC man.
- Joined
- May 9, 2018
- Posts
- 7,137
- Reaction score
- 13,928
Lowering your Tahoe, raises the curb........
- Joined
- May 9, 2018
- Posts
- 7,137
- Reaction score
- 13,928
Here's your fix..... Tahoe/Yukon forum starting a "GoFundMe" to send you a set....
Attachments
I just went out there and pulled it off the curb, nothing damaged this time.
mikeyss
Full Access Member
Also, be carefully backing over the grass... Next thing you know the landscapers trying to cut the grass will be slinging clippings and stuff all over your rear end
Also, be carefully backing over the grass... Next thing you know the landscapers trying to cut the grass will be slinging clippings and stuff all over your rear end
Remember my post last summer? About one of those guys mowers rifled out a piece of tree branch, and bounced off my B pillar and destroyed the d/s mirror?
maaan, blew out one of my JL's $850 aint that a b*itch
HortonHiresAHoe
Full Access Member
replace it with a good submaaan, blew out one of my JL's $850 aint that a b*itch
- Joined
- May 9, 2018
- Posts
- 7,137
- Reaction score
- 13,928
With mega bites....replace it with a good sub
Attachments
haah! I think that particular sub is about 8 years old, maybe more and it's been beat on hard. it's sister went out about 4 years ago. Hard to beat a jlreplace it with a good sub
