What did you do to your NNBS GMT900 Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

dkad260

Full Access Member
Joined
Jul 21, 2019
Posts
356
Reaction score
351
This is from the shop manual. Subscribe to it at AllDataDIY.
I wonder if there was a revision made at some point.

There are many posts and links to data sheets that show 15-30, as well as 14-19 inch pounds.

I'm right at 18-19 so that should work...hope so anyway..lol.
 

swathdiver

Full Access Member
Joined
May 18, 2017
Posts
19,218
Reaction score
25,361
Location
Treasure Coast, Florida
I wonder if there was a revision made at some point.

There are many posts and links to data sheets that show 15-30, as well as 14-19 inch pounds.

I'm right at 18-19 so that should work...hope so anyway..lol.
The manual is kept up to date. I could check a manual copy if you want, what are you referring to?
 

the_tool_man

Full Access Member
Joined
Oct 15, 2018
Posts
750
Reaction score
1,712
Location
Upstate South Carolina
Will one from an Escalade work with no modifications or gaps? I know a guy that has two black ones he's parting out.
That's what I used on my Yukon. It's the same at the ends where it matters. The difference is the width of the CHMSL lens. What's cool is that the Eagle Eyes fully-lit spoiler uses the same lens shape as OEM Escalade, so the light can be swapped to and OEM Escalade spoiler and fit perfectly.
 

dkad260

Full Access Member
Joined
Jul 21, 2019
Posts
356
Reaction score
351
The manual is kept up to date. I could check a manual copy if you want, what are you referring to?

Rebuilding the rear diff, (8.6")

Seems that 14-19 inch pounds of pinion preload is what's documented, and there's a few articles showing 15-30.

I can't tell if that's a revised figure, or maybe pinion with carrier preload.

It's all back together and I had 18 inch pounds of pinion, and about 25-27 ish total of pinion and carrier with the 3.42 ratio so all should be in spec.
 

iamdub

Full Access Member
Joined
Apr 23, 2016
Posts
20,802
Reaction score
44,799
Location
Li'l Weezyana
I've been tempted to try it in the 6.2. What is your MPG hit with E85?

Consistently down from 22 to 17.

It's still a win cuz I have to run high octane, so 93 or E85 are my only options. That 5 MPG is a 22% loss, meaning it's taking 22% more fuel than with 93. But, the E85 is 28% cheaper than the 93 (on this particular day the 93 was $3.95). So I'm getting what should be around the same octane as 93, if not more, at a 6% savings. Then there's the other benefits of E85 such as its cleaning and cooling properties.

Also, it's never 85% anywhere I've gotten it from. It has always been right around 65%. If it were 85%, I'd get a little less MPG. It'd still be a win financially. The rest of the benefits are inherent. The only drawback is needing to refuel sooner. I can live with that.
 

Forum statistics

Threads
129,565
Posts
1,817,831
Members
92,799
Latest member
Heavychevyvito

Latest posts

Top