What did you do to your NNBS GMT900 Tahoe/Yukon Today?
- Thread starter phattyford
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
did you get a deal on the esky upper brake light? looks like it needs to be painted my original one was black but I had the esky housing painted to match
R3cord303
Posse In Effect
I did a decent amount. I have a file cabinet, my new welder, and three survival bags in the back right now.
R3cord303
Posse In Effect
This is why i ditched mine. What a joke
Gannon
TYF Newbie
- Joined
- Aug 6, 2013
- Posts
- 18
- Reaction score
- 25
Actually had to cut mine out of my last truck. [emoji2361]
Sent from my iPhone using Tapatalk
R3cord303
Posse In Effect
I had to cut the boot and contort my wrist in an odd way to manually actuate the secondary latch, and then crank it down and get this crazy sticky grease off my hands to get mine down. Then I promptly took out all the bolts holding the winch in, and set the whole assembly up on a shelf. Eventually, it will go to the dump.
Bigkevschopshop
Full Access Member
Got a pretty good deal on everything with harnesses. Yeah just need paint on that 3rd.
the_tool_man
Full Access Member
I need to get an Esky wing. I'm running the Eagle Eye fully lit CHMSL, but its wing has warped, and the rubber flap won't stay put. Can anyone confirm that the light itself is a direct fit into an OEM Esky wing?
it is a direct fit, when I bought the eagle eyes I already had a oem painted to match housing and just needed the lamp, so I swapped the light it fit perfect,
gooffeyguy
Tom
I have the Eagle Eyes one also.
There was a post on here a couple months ago about another company making a fully lit esky style CHMSL that runs about the same price as the Eagle Eyes one ($179)
Sent from my SM-G930V using Tapatalk
the_tool_man
Full Access Member
Thank you. I've had my eye on a couple on eBay for a while. Bonus, it'll come color matched instead of black.
So did I. I used a cut off wheel to cut the metal part in the hub hole. I'll be getting a replacement winch for it this year I hope. I hate running around without a spare. I know my luck will run out if I do.
Tonyrodz
Resident Resident
I carry a few cans of fix a flat--just in case.
bigrhino
Full Access Member
the_tool_man
Full Access Member
Yup. I had no issues with the OEM one. The Eagle Eye one started working out of its groove in less than a week. I tried to glue it in at the ends because that's where it would first try to pop out. But I couldn't get it to stay. I removed the flap from my OEM wing and installed it into the EE one. But it wouldn't stay, either. So I've been running without ever since. The only consequence that I can see is that more dirt washes into the space between the hatch sheet metal and the weather seal. It doesn't leak, or seem to allow any more road or wind noise in. Still, I'd rather have the flap than not. The one I ordered comes with a flap. Hopefully it's in good shape, so I don't have to touch it.
Kee Fuller
Full Access Member
i got mine off eBay sometime last year. Just got around to getting it installed when i painted my truck
gooffeyguy
Tom
I haven't had any problems with my Eagle Eyes flap, yet
Sent from my SM-G930V using Tapatalk
Sent from my SM-G930V using Tapatalk
So, I’m not sure what’s going on with my transmission. It seems to “grab and let go” repeatedly; almost like surging. This happens at low speed (5mph) and light throttle and when the trans is cold or been sitting for a while.
I’m at 138k miles. Only maintenance done to the trans was a full fluid replacement and filter change. It was not “backflushed”.
What joys await me?
Sent from my iPhone using Tapatalk
I’m at 138k miles. Only maintenance done to the trans was a full fluid replacement and filter change. It was not “backflushed”.
What joys await me?
Sent from my iPhone using Tapatalk
Hopefully it just needs a TCC solenoid, pretty common fix
Tonyrodz
Resident Resident
There'd be a code for that?
