What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[Tonyrodz]

the problem with the inner seals on the nnbs is the bottom part gets all torn up from getting in & out, never had that problem on my nbs, both driver and passenger side were tore up already when I bought mine and every one I looked at were as well, it doesn't seem to have gotten any worse since I have owned it and I don't think I ever step there so it must happen from short people

Vertically challenged--

 

[08z71bgm]

looks easy enough I think this seal has little plastic clips, mine has not arrived yet but I was looking thru the 11,000+ pages of the service manual and saw it, lol
View attachment 266642

Don’t over complicate it. Super easy to swap. Took me less than 7 mins start to finish. A1 1A whatever auto did a YouTube video on it. It’s the most simplest thing I done on the truck yet.

 

[08z71bgm]

Why did you use the “wrinkle plus” vs. the standard VHT paint? Just curious if it’s because that’s what you had laying around, or if it’s something specific for alum/oxi. I’ve used VHT on the manifolds/headers and calipers before but never tried their wrinkle plus line.


It might be worth trying some of the 3M stuff. It definitely won’t cause any tear issues with future repairs.

View attachment 266646

That is completely unnecessary for the door seal! If you get the gm one it fits just fine. The only time I needed to use this was on the windshield seal for the vert top on the c4

 

[Doubeleive]

Don’t over complicate it. Super easy to swap. Took me less than 7 mins start to finish. A1 1A whatever auto did a YouTube video on it. It’s the most simplest thing I done on the truck yet.

I am still waiting for mine to get here it left texas and skipped california (where i live) and wound up in oregon, now it has a shipping exception and a delivery date for jan 10th when it is less than 5 hours from me, wtf

 

[gooffeyguy]

I am still waiting for mine to get here it left texas and skipped california (where i live) and wound up in oregon, now it has a shipping exception and a delivery date for jan 10th when it is less than 5 hours from me, wtf

Shit, I had a package sitting at the St. Louis hub (10mins from my house) from the 11th of December till the 21st. Original delivery was scheduled for the 12th. Had another here at the local hub on the 12th and not delivered till the 23rd

Sent from my SM-G930V using Tapatalk

 

[Doubeleive]

Shit, I had a package sitting at the St. Louis hub (10mins from my house) from the 11th of December till the 21st. Original delivery was scheduled for the 12th. Had another here at the local hub on the 12th and not delivered till the 23rd

Sent from my SM-G930V using Tapatalk

here is one I shipped nov 23rd, usps still claims it's simply delayed

 

[Sam Harris]

Praying for a full recovery for you, @lee.solorzano. May 2021 be a great year for your health!

X2! Take care of yourself!

 

[89Suburban]

And while installing the valve covers yesterday.
I decided i might as well clean them up a bit.
No point to install dirty parts...

I thought for a moment about giving them a high polish, but went for a light brushed look using Fine grit 3M Crossbuffs...

View attachment 266551
View attachment 266552

Top picture you can see my AC flush tool that i used to prime the oil system...


I also replaced the oil fill tube, cap, oil level dipstick tube, and dipstick.

Went to remove the Oil Fill cap and noticed it's a one time use, lock tab breaks off!

And the dipstick would not remove for me when pulling the heads, it was a bit tweaked.
Found the local dealership had everything i needed in stock.
So i mangled the F out of the dipstick tube to get it out.


New one slid in after being well lubed.

What oil fill tube and cap did you go with?

 

[alpha_omega]

What oil fill tube and cap did you go with?

The ole lag bolt and slide hammer method works best when trying to pull that damn dipstick tube out.

 

[89Suburban]

Front turn signal mod successful. Still want to do the alternating side markers but baby steps.

 

[Sam Harris]

Front turn signal mod successful. Still want to do the alternating side markers but baby steps.

View attachment 266690

No more DRLs?

 

[89Suburban]

No more DRLs?

Nope

 

[89Suburban]

No more DRLs?

i use my fogs for DRLS if I think it is necessary. here is a night shot.

 

[89Suburban]

For some reason this dashtop panel keeps popping up. Still have the little drummer boy noise too under the dash when it’s cold.

 

[Just Fishing]

What oil fill tube and cap did you go with?

Just the OEM from a GM dealer.

 

[89Suburban]

Just the OEM from a GM dealer.

part numbers?

 

[Just Fishing]

part numbers?

fk if i know, i went to gm parts direct and looked up the PN, wrote it on a piece of paper and gave it to the gal behind the counter... lol

 

[Just Fishing]

just started the hoe with everything connected, getting a C0561 error.
"ABS invalid data"

Otherwise it seems good.

I did get some messages about stabalitrack...
Might need to remove some other AFM related things in the tune...

I still had sensor errors enabled, so i'll try killing those first.

 

[Jason in DLH]

Wife’s not gonna be happy...painted in the garage again.

Was going to remove side panel thing, but decided too much work, so painted right on over it...

Still undecided if I should wet sand and polish the flares or rubberize them to match.

Always wanted a two tone. But seriously...wife’s gonna be mad.

 

[Just Fishing]

My Catch Can install.

I spent waaaay too long on this... lol