What did you do to your OBS GMT400 Tahoe/Yukon Today?

[Gzes]

Put on a heavy duty radiator so hopefully it helps. Gonna do big 3/4 when I get a big crimped or a torch for sauter. Have 0 gauge so that should be enough for my high output alt

 

[Y2KpewterZ]

Got LEDs in the cluster and hvac. Next are the window switches and door locks.

 

[bowtiefreak]

upper ball joints. both trucks are now inspected and happy

 

[95escahoe]

Dropped it off to get the leafs/drop shackles/keys and some other things done

 

[bigal11419]

Got her professionally detailed to get the last of the previous owners funk out of and off of it.

Finally she's clean

 

[Gzes]

Gotta love po funk

 

[bowtiefreak]

got the best alignment my tahoe has EVER seen. Guy did great work and came highly recommended. After hearing NO from three other places this was a relief. I think the suburban needs new shocks and a crank...then an alignment now

 

[95escahoe]

Got around to doing the leafs, drop shackles & keys, poly front and rear swaybar bushings, and new frame bumpers, could have went lower but good for where I live

 

[knucklebuster283]

New water pump, thermostat, high preasure power steering hose.

 

[I go every where]

Replaced the inside door handle on the driver side as well as the switch that controls the mirrors. DIDNT BREAK A SINGLE CLIP! As you all know thats damn near impossible haha.

---------- Post added at 09:20 PM ---------- Previous post was at 09:20 PM ----------

got the best alignment my tahoe has EVER seen. Guy did great work and came highly recommended. After hearing NO from three other places this was a relief. I think the suburban needs new shocks and a crank...then an alignment now

Why did they tell you no?

 

[knucklebuster283]

Today I removed all the left over wiring from PO stereo, pulled the spark plugs and cleaned them. #'s 2, 3, and 7, caked with a white crusty crap. # 2 so bad it wasn't firing. Possible head gaskets in the very near future. Will be doing a compression test this week. Ran like crap before, now pretty good.

 

[nikoniko99]

i just got ***** for $165(wasn't sure if it was a deal)! front and rear diff oil change... i didn't have any clue about any of it! after the mechanic showed me what he did, lessoned learned... check with TYF community before anything else! looked easy enough for a newbie like myself to do, oh well.

 

[landsoul]

For giggles I went to the local Chevy dealer to get a price on replacing the upper and lower ball joints. They quoted me $1,400 for one wheel.

I laughed and did it myself for under $100 using Moog parts.

I ordered all my felpro gaskets, thermostat and bolts to get ready for this weekend when i replace the intake gasket.

 

[jerryjoe28]

ordered the RCX 6" lift and 35s today!

 

[noJeepshere]

I'm on vacation about 700 miles from home, and of course the water pump decides to puke coolant all over...

cent frum a smaert fone

 

[jerryjoe28]

I'm on vacation about 700 miles from home, and of course the water pump decides to puke coolant all over...

cent frum a smaert fone

ouch... hope you get that fixed

 

[noJeepshere]

It's good now, $125 for a water pump and an afternoon in my dad's driveway and life is good again.

cent frum a smaert fone

 

[landsoul]

Met up with Justin from Black Bear for an upgraded performance tune. Really enjoying the responsiveness of the throttle and the shift points.

 

[bigal11419]

Replaced the rear wiper arm due to the old one only clean half the window. Wound up having to cut the old one off, it would not budge.

 

[99YukonSLT]

Oil change, rotation, and picked up some 17x8 American racing wheels on the Summit Racing discount rack today. One has a slight dent on the lip which I can get fixed through work or just live with it. Any tire suggestions?