What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[Rocket Man]

Removed > disassembled > cleaned > reinstalled the rear window switches... now they work going up AND down again.

Previously my kids could roll them down but not up or vice versa, can't remember off the top of my head... but they work now... saved myself $16 by not buying new ones.

Maybe $16 for cheap aftermarket ones, ACDelco switches are more like $40 iirc. Good job.

 

[kbuskill]

Maybe $16 for cheap aftermarket ones, ACDelco switches are more like $40 iirc. Good job.

I was just going off of the price on Ebay for the switches that James @swathdiver said was made by the same factory as the OEM... so if its $40, all the better.

After getting taken on those "AC DELCO IRIDIUM" plugs from Ebay, I am sceptical of everything on Ebay... lol

Did you see my post about those plugs?

 

[swathdiver]

I was just going off of the price on Ebay for the switches that James @swathdiver said was made by the same factory as the OEM... so if its $40, all the better.

The window switches are/were about $20 for ACDelco or $8 in a white box from the same factory. Same exact markings, feel, textures, etc.

Same for the AC Actuators. $45 instead of $75 plus. To avoid the fake plugs on ebay, I made sure they were 41-985s, the old number from when the truck was new. The shelf wear on the box helped too.

 

[Rocket Man]

I was just going off of the price on Ebay for the switches that James @swathdiver said was made by the same factory as the OEM... so if its $40, all the better.

After getting taken on those "AC DELCO IRIDIUM" plugs from Ebay, I am sceptical of everything on Ebay... lol

Did you see my post about those plugs?

Yep. I’ve seen the ACDelco plugs on EBay for 1/4 to 1/2 the price of other ACDelco plugs and assumed they were fake. I would assume those cheap switches are fake too. I bought one that I knew was aftermarket for about $12-14 and it lasted a couple months. That’s when I learned about cleaning them. Luckily I had kept the original ACDelco one and cleaned it and it’s been working for over a year now. I tried cleaning the cheap one but it still didn’t work.

 

[Doubeleive]

Grateful for my rear rubber mat in back, milk fell over and the mat slots caught most of it, rest went into the channel under the rear back sill plate made for a relatively easy clean up, rinsed right off.

 

[MP40Gunner]

Got my new grille and splash guards put on. Had to trim the front ones due to rubbing.

 

[1BADI5]

I got my wideband situated ......I got a headlight bezel for a 4x4 and opened the hole up for the gauge..... perfect fit.

Just need to get my bung for the O2 sensor burned in to the y pipe. I have the serial port cable in place for tuning with HPTuners

 

[gooffeyguy]

Got my new grille and splash guards put on. Had to trim the front ones due to rubbing.

View attachment 245180
View attachment 245183
View attachment 245185

Nice, where did you get the grill from?

I'd like to blacken mine, but then I'd probably have to get rid of the rest of the chome on the vehicle... Lol

2001 Yukon SLT
2012 Yukon Denali XL
2011 Yukon Denali RIP 5/20/18

 

[gooffeyguy]

I got my wideband situated ......I got a headlight bezel for a 4x4 and opened the hole up for the gauge..... perfect fit.

Just need to get my bung for the O2 sensor burned in to the y pipe. I have the serial port cable in place for tuning with HPTuners

View attachment 245182 View attachment 245184

Are you boosted?

2001 Yukon SLT
2012 Yukon Denali XL
2011 Yukon Denali RIP 5/20/18

 

[1BADI5]

Are you boosted?

2001 Yukon SLT
2012 Yukon Denali XL
2011 Yukon Denali RIP 5/20/18

Not yet. I have an LSA blower in the garage I need to finish.......but I will more then likely be going with a Procharger.

My tax bill this year cut into my build moneys