Let's see some pics of some lifted and leveled

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

randeez

Full Access Member
Joined
Sep 29, 2017
Posts
6,027
Reaction score
18,434
Location
south florida
yea i wasnt thinking it would come loose. my concern was more if you torque it down say at the outside of the pocket, alignment, yadda yadda. stuff the tire and it pushed the balljoint a 1/4" back into the pocket. i just wanted to have no room for the ball joint to be able to move around. drilling the uca out to 3/8 and using 3/8 hardware the bj cant slide around
 

Jimmit

TYF Newbie
Joined
Jan 9, 2023
Posts
13
Reaction score
11
We’ll post alignment, she rides sweet. Apparently my eyeball alignment was… meh. Camber was spot on, but toe was off the charts and caster was like 6.5 lol. She’s still “out” on caster at 4.5 but we decided equal caster on both sides was better than one side at 4.5 and the other at 3.7
 

JJ351

Member
Joined
Mar 16, 2017
Posts
67
Reaction score
58
Location
CA
Finally got some good weather to figure out a solid solution to the bottom skid plate mount; M8 stainless nutserts, 50mm stainless M8 bolts, and 25mm stainless spacers. In the meantime, I'm thinking a wider aluminum skid with 5 inch fog lights.
 

Attachments

  • 20230331_181216.jpg
    20230331_181216.jpg
    484.2 KB · Views: 10
  • skid2.jpg
    skid2.jpg
    484.6 KB · Views: 9

992dr

Full Access Member
Joined
Oct 8, 2009
Posts
3,119
Reaction score
1,139
Location
N.C.
Finally got some good weather to figure out a solid solution to the bottom skid plate mount; M8 stainless nutserts, 50mm stainless M8 bolts, and 25mm stainless spacers. In the meantime, I'm thinking a wider aluminum skid with 5 inch fog lights.
Damn, THAT looks a gooooooood
I like the plans for skid and fogs
You need post more pics of your ride :)
 

Forum statistics

Threads
128,786
Posts
1,805,403
Members
91,766
Latest member
GeorgeC
Top