OP
OP
Bombsquads 05 Denali build..... sorta
- Thread starter Bombsquad85
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OP
OP
Bombsquad85
Full Access Member
https://custom-brackets-designs.mys...6-gmc-yukon-denali-mh1-7-0-retrofit-c-bracket
Just placed an order for these bad boys. They should make the retro easier. Now I just need a couple of my detail checks to come in the pay for the rest
Just placed an order for these bad boys. They should make the retro easier. Now I just need a couple of my detail checks to come in the pay for the rest
Nice. Keep us posted on how good they work.
OP
OP
Bombsquad85
Full Access Member
Will do
OP
OP
Bombsquad85
Full Access Member
Just followed this video to do the 4hi mod. Super easy and free! It took me 10 min and that was because I kept pausing the video and comparing his wires to mine. Now I shouldn't have any issue with the bixenon projectors
OP
OP
Bombsquad85
Full Access Member
Brackets are in. Projectors should be ordered next week
OP
OP
Bombsquad85
Full Access Member
New foglights installed!
Tonyrodz
Resident Resident
Bulbs or complete lenses?
OP
OP
Bombsquad85
Full Access Member
Complete housings
My old ones were taking on water, cloudy and kept blowing bulbs these are crystal clear
Got them after returning the god awful LED bulbs I got
Tonyrodz
Resident Resident
Nice. Did you run a bead of silicone around them? Just in case.
OP
OP
Bombsquad85
Full Access Member
I thought about it but I didn't have silicone on hand. When I do my retro I will
OP
OP
Bombsquad85
Full Access Member
Painted the brackets flat black with high heat paint so they dont rust the rest of the retro has been ordered possibly here tomorrow or the next day.
OP
OP
Bombsquad85
Full Access Member
Retrofit is done!
OP
OP
Bombsquad85
Full Access Member
I'll get output shots this weekend most likely. I do need to find some stock adjusters since mine are frozen
OP
OP
Bombsquad85
Full Access Member
Output shots. Waiting on correct bulbs and looking for a new adjuster for passenger side
73impala
Full Access Member
Nice man!
adventurenali92
Full Access Member
Cool upgrade!
OP
OP
Bombsquad85
Full Access Member
Well it looks like I dont need a new adjuster. Vice grips do wonders..I was able to adjust the light and install my new bulbs.
Night shots later.
I also wired the factory halogen highs to come on along with the bixenon for more bright!
Night shots later.
I also wired the factory halogen highs to come on along with the bixenon for more bright!
They make a splitter/ pigtail so you can just plug both together into the vehicle plug.
OP
OP
Bombsquad85
Full Access Member
I didn't order it when I got the rest of my stuff. I went back to order it again and shipping would have been more than the item. So I made my own. Still somewhat plug and play. I tapped the high beam solenoid into the harness for the headlight, cut the nub in the female connector then plugged the other end int oll the highbeam bulb and the connector to the factory input. Easy and removable and free.
Similar threads
