builds4christ

builds4christ

Member
Joined
Last seen
Posts
81
Reaction score
57
Points
18

Latest activity Postings About

    • builds4christ
      builds4christ replied to the thread Running lean.
      Been awhile! Sorry guys. It ended up being the FSCM. I got a dorman one from Orielly that was preprogrammed. So far it's running...
    • builds4christ
      builds4christ reacted to mikez71's post in the thread Running lean with Like Like.
      I haven't heard of the EVAP system measuring vacuum from the fuel level going down.. I have heard it measures pressure increase from the...
    • builds4christ
      builds4christ replied to the thread Front suspension torque specs.
      Thanks for this brother. I really needed it for my 08 Yukon. I think instead of it sitting on the wheels, you can just put a jack under...
    • builds4christ
      builds4christ reacted to swathdiver's post in the thread Front suspension torque specs with Like Like.
      We just did all this too. The strut bolts, top and bottom are 37 ft lbs. The sway bar end links are 17 ft lbs. The upper control arm...
    • builds4christ
      builds4christ replied to the thread Running lean.
      Yep you guys got it. I ran the truck monitoring vent and tank pressure. The highest the pressure got was .4 mmHG. The vent remained...
    • builds4christ
      builds4christ reacted to mikez71's post in the thread Running lean with Like Like.
      But with the purge valve unplugged it won't pull vacuum. You can just unplug the electrical connection to vent valve, as it's normally...
    • builds4christ
      builds4christ reacted to rdezs's post in the thread Running lean with Like Like.
      Go down by your carbon canister and locate your vent valve solenoid. You'll see it vents up a rubber hose that goes up by the fuel...
    • builds4christ
      builds4christ reacted to rdezs's post in the thread Running lean with Like Like.
      The piece that's at the end of the hose is basically a screen made from plastic. What's disconnecting the hose from the vent valve...
    • builds4christ
      builds4christ replied to the thread Running lean.
      I get what you're saying. I wouldn't mind venting it to atmosphere, but was honestly unsure about which line to disconnect. The truck...
    • builds4christ
      builds4christ reacted to rdezs's post in the thread Running lean with Like Like.
      The EVAP system isn't that simple. If you watch on a tech 2, when it commands the purge valve to open it also commands the vent valve to...
    • builds4christ
      builds4christ replied to the thread Running lean.
      I unplugged the purge valve so that it wouldn't open. I'm not 100% certain, but the assumption was that as pressure increases and goes...
    • builds4christ
      builds4christ reacted to rdezs's post in the thread Running lean with Like Like.
      I'm kind of stuck on this statement: "7) purge valve delete (unplugged purge valve and capped intake port, but left everything else...
    • builds4christ
      builds4christ reacted to dkad260's post in the thread Running lean with Like Like.
      I went back to look through this thread, and somehow (dumb thumbs) I missed page 2...lol. Makes more sense now with all that info. GM's...
    • builds4christ
      builds4christ replied to the thread Running lean.
      @mikez71 Interestingly enough, the walkers I pulled out of it a few days ago didn't look too bad along the body or the tips. Just on the...
    • builds4christ
      builds4christ reacted to mikez71's post in the thread Running lean with Like Like.
      So you're saying the O2's actually foul out? Are the tips blackened? I hear you need a wideband o2 to really tune your fueling/vve...
    Show older items
  • Loading…
  • Loading…

Forum statistics

Threads
138,035
Posts
1,997,524
Members
102,972
Latest member
mudrunnerz

Latest posts

Back
Top