AtomicHoe094
Atomichoe094
that trailer is pretty ****, is the canvas a cover for ******** in? lol kinda hard to tell
'99 Tahoe - Expedition Build!
- Thread starter sparg93
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Monstar_est87
Full Access Member
Yea real tango & cash..!
underneath the canvas is x5 MT Baja Claw tires on beadlocked rims...all brand new! (unfortunately the beadlocks are 5 lug - jeep setup)
The original owner had that frame built to carry his offroad tires...once he got off highway, he could easily swap out the set....also the reason for the worm gear to raise the lid of the trailer (those tires are heavy!!)
The entire tire setup is for sale!
blue99tahoe24
bout that tahoe life
nice upgrades
currently working on the Rough Country lift - should be done by tomorrow!
Nice kit and very straightforward install...unless you've done this before and all bolts come out easily, there is NO WAY you can complete the install in 6-8hrs.
I'm slow so it takes me a bit longer, but 6-8hrs is lightspeed.
The tolerances on the kit are perfect so far..really psyched to see everything buttoned up.
Nice kit and very straightforward install...unless you've done this before and all bolts come out easily, there is NO WAY you can complete the install in 6-8hrs.
I'm slow so it takes me a bit longer, but 6-8hrs is lightspeed.
The tolerances on the kit are perfect so far..really psyched to see everything buttoned up.
AtomicHoe094
Atomichoe094
wheres the pictures homie!! slowpoke haha
no photos today folks, but the RCX kit is in.
I ran out of time to put in the Alcan Springs and 14bsf, so stay tuned next week.
After changing the pitman and idler arm (you have to take the steering gear out), the STEERING GEAR started to leak!!!!
So...the steerig gear gets swapped next week...i'm taking the next few days off from underneath this rig.
I ran out of time to put in the Alcan Springs and 14bsf, so stay tuned next week.
After changing the pitman and idler arm (you have to take the steering gear out), the STEERING GEAR started to leak!!!!
So...the steerig gear gets swapped next week...i'm taking the next few days off from underneath this rig.
AtomicHoe094
Atomichoe094
yikess.. thats no fun
no, no its not...it was literally, "you gotta be kidding me"...
I was looking inside my engine bay today, and it was really hard to find any used parts. It's very true, once you touch a part with 100k on it, it no longer works
On the plus side, I'm now driving a 1999 Tahoe built in 2012!!!
I was looking inside my engine bay today, and it was really hard to find any used parts. It's very true, once you touch a part with 100k on it, it no longer works
On the plus side, I'm now driving a 1999 Tahoe built in 2012!!!
AtomicHoe094
Atomichoe094
if you need anything that you dont want to spend the loot on, let me know, i have this tahoe limited im parting out.. cheap parts if you need something lol..
AtomicHoe094
Atomichoe094
those are always fun nights when the parts store either arnt open or dont have the damn part you need!
JubjubW
Full Access Member
nice build! What hitch are you using? I was trying to find a decent one to use off roading but cannot remember what they are called for the life of me
LittlePearl13
Full Access Member
I can't wait to see this truck when it's completely buttoned up - subscribed!
Almost done with rebuilding the 14bolt...just finished up new pads and springs...tomorrow I bend and flare new brake pipes!
I bought wagner sever duty shoes for the full float rear., not the semi float I have - for anyone that needs to know, the semi float is a 11.**" rear, the full float is 13.**" So, I ran to Parts Authority in NY and purchased the Centric full brake hardware kit and Pep Boys Platinum shoes. That wasn't my first choice, but it's the best I could find in a pinch.
old:
new:
Today we did some wheelin in the sand...some photos just for fun.
All of us:
Check out this oldie...rebuilt with a 302 and C4 tranny.
Stuck at the top of the hill
Another jeep
I bought wagner sever duty shoes for the full float rear., not the semi float I have - for anyone that needs to know, the semi float is a 11.**" rear, the full float is 13.**" So, I ran to Parts Authority in NY and purchased the Centric full brake hardware kit and Pep Boys Platinum shoes. That wasn't my first choice, but it's the best I could find in a pinch.
old:
new:
Today we did some wheelin in the sand...some photos just for fun.
All of us:
Check out this oldie...rebuilt with a 302 and C4 tranny.
Stuck at the top of the hill
Another jeep
Last edited:
AtomicHoe094
Atomichoe094
nice! howd she do in the sand??
Amazing!! It was the heaviest out there, took the hardest lines and was stuck the least!!
The more I wheel the truck, the more impressed I've been with it's capabilities...
---------- Post added at 10:57 PM ---------- Previous post was at 10:47 PM ----------
One of the guys just uploaded this photo...I think it came out great.
Heavy Chevy represent!
AtomicHoe094
Atomichoe094
badass picture right there! why dont you have a chick on your hood? lol
noJeepshere
Full Access Member
I'm not normally a fan of the Mickey Thompson Classic II's, but I am really digging them on your truck.
