What did you do to your NNBS GMT900 Tahoe/Yukon Today?

Rocket Man · Feb 19, 2020

I’ve been working on swapping from an LT to LTZ interior on my Silverado and today I made a custom switch bezel for the driver door since I couldn’t swap the LTZ harnesses over so I had to mount my LT switches in an LTZ bezel.

Staggered 02 · Feb 20, 2020

Picked up, inspected, and put the engine braces that were picked up from the powder coater yesterday. Flight leaves for LA in a few hours. Time sure flies when i am home. Need to order some fasteners and plan to have those installed when I get back.

Overall a productive few days and time off.

The engine braces for the Duramax where done and packed up. I can install those when the Duramax arrives in LA in the next few days.

grim hurst · Feb 20, 2020

Just recently installed rgb lights

gooffeyguy · Feb 20, 2020

alexalex said:
Fully agree! I personally have a Wixey angle finder reviewed by ProductAdvisor that I am finally beginning to use, mostly to help me find new or forgotten locations of objects. It is a great tool for first time finding. If your angle finder is not self zeroing, be sure to do that, and then you are set. The Wixey is very compact and works well. It's drawback is the brightish green display on the model I have.

It really aggravates me also when I lose my angles!

[emoji23]

2001 Yukon SLT
2012 Yukon Denali XL
2011 Yukon Denali RIP 5/20/18

67RS427 · Feb 20, 2020

I cleaned my garage today to make room for my new Sierra Elevation...

Also, UPS came today and delivered my new Wilwood Brakes for the Denali. Pictures don't do justice, these 16" rotors are HUGE!!! Can't wait to install them, big things coming this spring including lighter weight 20" wheels and drag radials. I'll be well on my way to running that 10 second QTR sooner than later.

HiHoeSilver · Feb 20, 2020

67RS427 said:
I cleaned my garage today to make room for my new Sierra Elevation...
View attachment 241010

Also, UPS came today and delivered my new Wilwood Brakes for the Denali. Pictures don't do justice, these 16" rotors are HUGE!!! Can't wait to install them, big things coming this spring including lighter weight 20" wheels and drag radials. I'll be well on my way to running that 10 second QTR sooner than later.

View attachment 241011

Those are gonna look awesome.

gat0r · Feb 20, 2020

i have 15" in my 22's.
16" in 20's will be really full :Big Laugh:

BG1988 · Feb 21, 2020

R3cord303 said:
I have always run Toyo Open Country but have been tossing around going to Nitto next time. They have the same parent company so itll mainly come down to price or looks.

I test fit my hybrid d pillar trim this morning. Turns out they dont fit without the hybrid tails. Come Sunday I’ll put both on and see if they clear the non hybrid hatch, and then take them off again until I can get some hybrid tail lights and pray to god the hybrid tails work with the stock harness.

View attachment 240612

the tail gates are the same but the slightly longer wing disables the glass .. the tail lights are 5 pin just compare it before doing anything (the lower light does not come on with the brake light it's a turn signal only)

R3cord303 · Feb 21, 2020

BG1988 said:
the tail gates are the same but the slightly longer wing disables the glass .. the tail lights are 5 pin just compare it before doing anything (the lower light does not come on with the brake light it's a turn signal only)

any chance you could pop one of yours out and drop a picture next time you have time?

George B · Feb 21, 2020

No more AFM thanks to a Range AFM disable.

What did you do to your NNBS GMT900 Tahoe/Yukon Today?

Rocket Man

Mark

Staggered 02

Full Access Member

grim hurst

Member

gooffeyguy

Tom

67RS427

Full Access Member

HiHoeSilver

Away!

gat0r

Full Access Member

BG1988

Full Access Member

R3cord303

Posse In Effect

George B

¯\_(ツ)_/¯

Similar threads

Forum statistics

Latest posts