08z71bgm
Full Access Member
Btw the SKF wheel hub I bought locally isn’t much more than what rock auto has it for. It’s 204 plus tax and shipping and locally is 250.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I'll find out for sure in a few days it has to sit and let the seal set. washed it this morning before I dropped it off, probably have a nice birdshit on it tomorrow.I always get the tint strip. Glad to hear the glass seal was the leak source, hope that fixed it. Two birds as they say.
Did you let her rip tater chip?I took her to the Freedom Factory today.
![]()
Sent from my iPhone using Tapatalk
I definitely let the bald eagles scream out the long tubes on my way out!!Did you let her rip tater chip?
I hear the bald eagles screaming in that pic from here!!!
Just noticed that those wipers are rated for far more than 135 mph. More like 2220 kph that’s roughly 1380 mph!!! Those are some serious wipers!!!!!Trico 25220 "Force" rated for 135mph+ I can confirm they work well to said speed rating, no lifting.
cheap on rockauto, this set is on there 2nd season and still like new
View attachment 277125
Next step is a minivan. Beware.Had to buy a shit carrier for the roof.![]()
Sent from my iPhone using Tapatalk
that's probably a typo, lol my issue with regular stock blades is they start to lift and not work well after about 80-85mph, the popular replacement brand (can't think of the name) work a little better to almost 100 but then they lift also.Just noticed that those wipers are rated for far more than 135 mph. More like 2220 kph that’s roughly 1380 mph!!! Those are some serious wipers!!!!!
So i went to scan my code this morning, that was...interesting. I dont know if its because the code reader or what but it started to freak out at it being plugged in, went to 'service traction control' 'service stabilatrack' messages, and didnt find any codes. I tried cycling it on/off a few times and reading it more but same thing. I decided well, i will just try a different scanner. But apparently opening and closing the door which turned on and off the accessory power cleared everything and the truck is fine.....sure....why not.
Maybe it was the gas cap?



Mine came with one, and it does look out of place. I might hit with some flat black to help.Bought these and put one on my catch can for a drain. Meh, not impressed. Just feels cheap and looks un-automotive. I don’t like them even tho they will work. Might go to something different.
So i went to scan my code this morning, that was...interesting. I dont know if its because the code reader or what but it started to freak out at it being plugged in, went to 'service traction control' 'service stabilatrack' messages, and didnt find any codes. I tried cycling it on/off a few times and reading it more but same thing. I decided well, i will just try a different scanner. But apparently opening and closing the door which turned on and off the accessory power cleared everything and the truck is fine.....sure....why not.
I have one with threads on both ends. I like it a lot better than the pos petcock it came with. Seems fine to me. Old pic.. this was at install.Bought these and put one on my catch can for a drain. Meh, not impressed. Just feels cheap and looks un-automotive. I don’t like them even tho they will work. Might go to something different.
Probably a similar valve.I have one with threads on both ends. I like it a lot better than the pos petcock it came with. Seems fine to me. Old pic.. this was at install.
![]()
Don’t you put that evil on me Ricky Bobby!! The minivan has even less room! If I’m getting a Van it’s an express van!Next step is a minivan. Beware.
Looked like you had a thread, and then a barbed end for tubing attachment. I wasn’t sure if you had attached a tube to it, or plan to.Probably a similar valve.
One end is threaded and one is a barb. No hose but I did put a cap on it. Just in case it comes open for some reason.Looked like you had a thread, and then a barbed end for tubing attachment. I wasn’t sure if you had attached a tube to it, or plan to.