What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[kbuskill]

Nice burble, mine does that on decel if I downshift. Hey look at the dash now, it’s nearly complete.View attachment 237378View attachment 237379View attachment 237380

Come on Mark, did you have to leave your DIC hanging out for the pictures???

 

[Doubeleive]

I call BS that 40# of snow caused either the front to drop 2” or the rear to raise 2”. If that were the case, we’d be damn near flipping cars on their noses here in the Midwest with all the snow that gets built up on the front bumpers.

not to mention the nearly 700lbs of my family getting in the truck I guess we would be riding on the frame?

 

[wjburken]

not to mention the nearly 700lbs of my family getting in the truck I guess we would be riding on the frame?

That extra 40# battery you have in your Denali must have dropped the front as well.

 

[Doubeleive]

That extra 40# battery you have in your Denali must have dropped the front as well.

 

[R3cord303]

The suvs have a 2" rake stock, thats why a 2" bottom of strut spacer will level the trucks.

 

[wjburken]

The suvs have a 2" rake stock, thats why a 2" bottom of strut spacer will level the trucks.

There you go using facts again. Not going to cut it in this conversation.

 

[swathdiver]

Nice burble, mine does that on decel if I downshift. Hey look at the dash now, it’s nearly complete.View attachment 237378View attachment 237379View attachment 237380

What are your plans for the pedals? Dash looks great!

 

[Mickey_7106]

Did an oil change. Only collected about 3qts. I had just topped it off about 1 month ago. Took about 6.5 qts with a tall k&n filter. Noticed that oil pressure was higher. Normally it's just above 40 psi on cold start. Now it's around 60 psi on cold start up

 

[Mickey_7106]

Also, i found the washer for the oil drain at the bottom of the collection pan . Oh well, it's not leaking so It'll stay off till the next oil change

 

[R3cord303]

Only collected about 3qts

Normally it's just above 40 psi on cold start

 

[Rocket Man]

Come on Mark, did you have to leave your DIC hanging out for the pictures???

I like to leave my DIC hanging out. All day.

 

[Rocket Man]

What are your plans for the pedals? Dash looks great!

Pedals?

 

[HiHoeSilver]

I like to leave my DIC hanging out. All day.

So, based on you advanced age, this just means you like to wear shorts?

 

[Rocket Man]

So, based on you advanced age, this just means you like to wear shorts?

Commando in short shorts.

 

[HiHoeSilver]

Did an oil change. Only collected about 3qts. I had just topped it off about 1 month ago. Took about 6.5 qts with a tall k&n filter. Noticed that oil pressure was higher. Normally it's just above 40 psi on cold start. Now it's around 60 psi on cold start up

3 quarts is a lot to lose in a month. Signs of leaking somewhere?

 

[swathdiver]

Pedals?

Yeah, the gas and brake pedals, gonna leave them old ones in there or do something custom?

 

[Rocket Man]

Yeah, the gas and brake pedals, gonna leave them old ones in there or do something custom?

Oh. Probably leave them. I’ve looked into custom ones before, though. Never found any I liked enough to spend $150.

 

[Mickey_7106]

3 quarts is a lot to lose in a month. Signs of leaking somewhere?

No sign of leak anywhere

 

[Doubeleive]

No sign of leak anywhere

if it was burning that much it would be smoking a lot

 

[R3cord303]

if it was burning that much it would be smoking a lot

My old engine burned a quart every thousand before I put the updated valve cover on it. Then it burned a quart every 3,000. It didn’t smoke a bit until it finally collapsed a lifter. Then it puffed unburnt fuel out the tailpipe