Tonyv__
Latest activity Postings About
-
-
Tonyv__ replied to the thread Tony’s express van engine upgrade/swap.I kind of assumed an ecm could be tuned to 6.0 parameters. Thanks I only got the donor ecm just in case. The guy threw it in the... -
... 'cause a 2.4L V4 is just too small. In fact the Gen5 V8 did not even bother with a 4.8L at all.
-
Tonyv__ replied to the thread Tony’s express van engine upgrade/swap.Well I’ll add one more question here just to keep a history trail before I contact your website can I just leave the 4.8 ecm in since...
-
Tonyv__ replied to the thread 2012 Suburban 5.3L broken valve spring.hmm I definitely understand your concern at 150k. The way I look at it, that spring can be a 30-60min job. Doing all the springs and...
-
Tonyv__ replied to the thread 2012 Suburban 5.3L broken valve spring.How many miles and do you know if you bent the valve? I just had this happen on my Yukon last year, only about 85k miles. Replaced...
-
Tonyv__ replied to the thread Tony’s express van engine upgrade/swap.Finally got a decent sound clip of the violence going on in my engine. Haven’t tracked down exactly what it is. Stethoscope sounds like...
-
Cool. Is it this one...
-
Tonyv__ replied to the thread Tony’s express van engine upgrade/swap.That looks like the one I was looking at. I recall there being 3 stages. The lowest one was ok with stock converter, the next one up...
-
Here is my engine rebuild thread on my 06, in case it you want to read through it. There's a link on post #18 for the the Gen III 6.0...
-
Tonyv__ replied to the thread Tony’s express van engine upgrade/swap.Unless steered otherwise, I was looking at the trucknorris cam. Preferably the one that doesn’t recommend a higher stall converter.
-
This is about to get interesting...
-
Tonyv__ replied to the thread Tony’s express van engine upgrade/swap.My Diablo tuner won’t connect. Reached out to them and they just said it wasn’t a supported vehicle. Gonna do some more research...
-
Tonyv__ replied to the thread Tony’s express van engine upgrade/swap.I’m torn on pulling the cam, but again, new bearings = reassurance. If I pull the cam, I’d love to do a VVT delete and dabble around...
-
Tonyv__ replied to the thread Tony’s express van engine upgrade/swap.Pulled all 8 pistons. I’m not seeing any excessive wear on the pistons or crank that I’m concerned about. Now again I’ll state That...
-
-
-
Loading…
-
Loading…
