What did you do to your OBS GMT400 Tahoe/Yukon Today?

[PG01]

Same had happed here, to the previous owners. I put up a Veeders make box. No further problems.
http://veedersmailbox.com

Hot damn, thats a mailbox......

 

[fastpat]

Hot damn, thats a mailbox......

All 65 pounds of it.

 

[DallasTahoe]

What I’m hoping mine will be able to do after getting a new transfer case

https://www.facebook.com/video.php?v=1734278819954311

Sent from my iPhone using Tapatalk

 

[1BADI5]

Well I bench bled and installed a 02 Silverado Master Cylinder today.........easy breezy!

But all that starts easy never ends/finishes easy right.

Well I got my Motive pressure bleeder set up and ready to go. The first bleeder (right rear) cracked open, but no fluid was coming out. Ok, move onto the left rear.....the bleeder breaks of F' ME sideways. Well lets see what happens up on right front caliper; I prepped it with a spray of Kroil and some heat......that MF'er broke off too!

So in order to flush the DOT3 which looks as old as the truck, I will end up replacing both rear wheel cylinders and both calipers. F' it, it will all be done and new.

 

[Shadowz Edge]

I pulled my TB to clean it up as well as the IAC area of the TB along with the MAF and replaced the TB gasket as well ... Out for a test drive as we speak.

So far idle has improved by 100 RPM at both parked and in drive and is a little snappier. And no I did not do the TB plate mod nor the air box expansion delete.

 

[TARDIS]

LED Headlight Conversion.

LOW Beam

 

[TARDIS]

And High Beams

 

[Shadowz Edge]

Looks good TARDIS ... Now it's time to do the 4HI mod

 

[TARDIS]

Looks good TARDIS ... Now it's time to do the 4HI mod

I've got a hold of an OEM Fog Light switch. I'm thinking of trying to combine the Low & High beams using the switch.

 

[fastpat]

Well I bench bled and installed a 02 Silverado Master Cylinder today.........easy breezy!

But all that starts easy never ends/finishes easy right.

Well I got my Motive pressure bleeder set up and ready to go. The first bleeder (right rear) cracked open, but no fluid was coming out. Ok, move onto the left rear.....the bleeder breaks of F' ME sideways. Well lets see what happens up on right front caliper; I prepped it with a spray of Kroil and some heat......that MF'er broke off too!

So in order to flush the DOT3 which looks as old as the truck, I will end up replacing both rear wheel cylinders and both calipers. F' it, it will all be done and new.

That's bad about the wringing off the bleeder screws. Still, wheel brake cylinders are cheap, and the calipers can either be taken off and have a removal tool used, or a rebuilt caliper used. They're just over $100.00 per pair.

 

[Shadowz Edge]

Went to the Tahoe this morning only to find my battery died due to me leaving the lights on yesterday (buzzer was removed - whoops).

So I'm planning on heading to the salvage yard to see if I can locate a drivers side battery tray and give her an upgrade

 

[Shadowz Edge]

Just got back from the salvage yard with $30 worth of goodies ...

 

[Tonyrodz]

Nice, those lights on reels are sweet.

 

[Shadowz Edge]

Nice, those lights on reels are sweet.

Thanks! I'm hoping to see if I can put 1 in my Tahoe and actually have it work. And 1 of the battery trays I'm going to install in the Tahoe for a dual battery setup.

 

[PG01]

Nice, those lights on reels are sweet.

Was thinking the same... good stuff right there

 

[Tonyrodz]

Thanks! I'm hoping to see if I can put 1 in my Tahoe and actually have it work. And 1 of the battery trays I'm going to install in the Tahoe for a dual battery setup.

Will def work. I have one also. I need to put it in my 03. Gotta put an led in there. It'll reach all the way to your rear bumper.

 

[Shadowz Edge]

Replaced my coolant temperature sensor WITHOUT draining the coolant!

 

[07Burb]

Tryna bring these GMC wheels back to life to throw on the Hoe. We're getting there

 

[PG01]

Tryna bring these GMC wheels back to life to throw on the Hoe. We're getting there

View attachment 204350

You just want your square ass showing...

 

[07Burb]

You just want your square ass showing...