You can now say good bye to auto stop

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

BG1988

Full Access Member
Joined
Nov 14, 2018
Posts
3,007
Reaction score
1,371
Now I get it!

For those who already have it, if you don't like it, just push the button to turn it off.

PS. I know of some people who have bought an installed modules to disable Auto Stop/Start.
auto stop stinks sometimes(when stopping at a stop sign) but I would have a capacitor inline with the battery just to increase reliability..

great if your waiting for a 2 mile train

this is how i broke my shifting cable i shifted it at lest 7200 times before it broke..

But I can disable both AFM and AutoStop by shifting to M4....
 
Last edited:

G-Frog

Member
Joined
Jan 22, 2021
Posts
37
Reaction score
31
Location
Nova Scotia
Just read about the stop/start. Should have waiting another month or so...lol.

On my previous ride, I also have the auto stop/start and got a module to be deactivated at all times. Whats out there for the Tahoes?? I know Range from back in 2011 on my SS are they still around and do they disable stop/start??
Range still makes them, but they don't have any yet for the 2021 GMC or Chevy. They only have until 2020 models.
Range Technology
 

SSGUNNER

Full Access Member
Joined
Jun 10, 2021
Posts
346
Reaction score
223
Thanks for the info. Any word of the SUVs had cylinder deactivation removed? Read on GMA.com that in March the Silverado’s had it removed. Currently have a build date 5/21 and read about the lifter defect…and well you can imagine my thoughts.
 

Dez78n

Member
Joined
Jun 7, 2021
Posts
80
Reaction score
78
I wasn't aware that the chip issue also affected the Auto Start/Stop feature until I saw Chloe_21's report. That's why I didn't understand the original post of paying to get it removed.

The Auto Start/Stop can be a real PITA for those who have never experienced it before. My first experience was with my 2018 Traverse which didn't have the "A" On/Off switch. I live in an area with many stop signs. Most times I didn't want the darn thing to shut down the engine for a 2 second stop. It was really annoying. Then I discovered that if you place the transmission in manual mode and selected the highest gear (9 in the Traverse) it would disable the Auto Stop/Start and shift normally.

GM must have adjusted it better for the 2021s because my Yukon doesn't activate right away when I come to a stop. It seems to take between 3 to 5 seconds before activating. They also added the "A" button to disable the system (finally).
Don't you have to disable it every time you start the vehicle though? My Honda has this and I HATE it. However I've learned the sweet spot on the brake pedal so I don't push down hard enough to engage the system
 

TollKeeper

Full Access Member
Joined
Feb 21, 2010
Posts
3,601
Reaction score
7,573
Location
Brighton, CO
Hurray! Mine is being built the week of 6/28, and I didn't want that "feature"!
Maybe.. It is an option you select on the build sheet right now.. Yours may have it since it was ordered with it.. I would check with your dealer and see if they know, but they likely wont even know.
 

wendal

Full Access Member
Joined
Jan 31, 2012
Posts
323
Reaction score
578
Location
Dallas
Maybe.. It is an option you select on the build sheet right now.. Yours may have it since it was ordered with it.. I would check with your dealer and see if they know, but they likely wont even know.
yeah I checked, they don't know...
 

G-Frog

Member
Joined
Jan 22, 2021
Posts
37
Reaction score
31
Location
Nova Scotia
Don't you have to disable it every time you start the vehicle though? My Honda has this and I HATE it. However I've learned the sweet spot on the brake pedal so I don't push down hard enough to engage the system
You are correct. The "A" button needs to be pushed every time you start the engine. But... its easier than selecting "L" and pushing the "+" sign 9 times.
I don't personally use the transmission manual mode to disable the auto stop/start like I used to in my 2018 Traverse. I find that my Yuken doesn't activate as often as the Traverse did. Like you, I have learned to adjust my driving to avoid it stopping the engine.

As a side note, there was a recall (N202307080 Auto Stop with Low Battery State of Charge) that was completed about 1 week ago; the auto stop/start has not worked since. I understand that there is a learning period, but it's been a week of every day city driving and it still not functioning. I don't think that I'll complain to the dealer. :)
 

B520044

Full Access Member
Joined
Sep 3, 2020
Posts
329
Reaction score
236
I can confirm that some of the new builds do not have the start/stop feature. Just put down a deposit on an AT4 and it was removed per the window sticker (-$50). I hate having to deactivate it after every startup. There are "always" days when you forget and then it shuts off when you stop to park. Then it turns back on when you change gear to park, then you shut it down again to exit....
 

Rhinoguy

TYF Newbie
Joined
Jun 20, 2021
Posts
1
Reaction score
0
Where is this chip located on the vehicle? I'm ready to ****** mine off.
 

CougarCruiser

TYF Newbie
Joined
May 3, 2021
Posts
13
Reaction score
10
What does the button do on units that have it disabled? Is it there? Is it removed?
 

ruise

Full Access Member
Joined
Nov 22, 2015
Posts
100
Reaction score
71
What is in place of the button that once controlled the Auto Stop and Start? My Denali is being produced in a couple of weeks.

First post here, but we picked up a ‘21 RST today and it (hallelujah) doesn’t have the auto stop and start.
 

Chloe_21

Full Access Member
Joined
May 20, 2021
Posts
183
Reaction score
103
What is in place of the button that once controlled the Auto Stop and Start? My Denali is being produced in a couple of weeks.
Nothing but a $50 credit towards MSRP.
They most likely will leave it blank.
 

Woopig74

TYF Newbie
Joined
Jun 20, 2021
Posts
13
Reaction score
13
What is in place of the button that once controlled the Auto Stop and Start? My Denali is being produced in a couple of weeks.
Just a blank tab with no decals or anything. I’ll try and get a picture.
 

Saltydog

Full Access Member
Joined
Jun 28, 2021
Posts
233
Reaction score
261
We have this on the Yukon, but it seldom activates. My eAssist Sierra had the start/stop but with the hybrid motor to restart things it was almost unnoticeable.
 

TollKeeper

Full Access Member
Joined
Feb 21, 2010
Posts
3,601
Reaction score
7,573
Location
Brighton, CO
With AC on max, its not supposed to do the start stop, unless they have since modified it from the programming I am used to of the 2010 Hybrids.
 

Jeremie

TYF Newbie
Joined
Jun 2, 2021
Posts
27
Reaction score
50
I can confirm that max AC prevents the start/stop. We've been in a major heat wave here, and the auto start/stop hasn't been happening at all with the A/C on max.
 

wendal

Full Access Member
Joined
Jan 31, 2012
Posts
323
Reaction score
578
Location
Dallas
CONFIRMED! I took delivery of my Denali today. The button is still there, but the functionality is NOT! Yay!
Update 7/15. I was mistaken, unfortunately. The button is there because the functionality is too on mine. Damn.
 
Last edited:

CougarCruiser

TYF Newbie
Joined
May 3, 2021
Posts
13
Reaction score
10
isn't this blank where the button usually is?
 

Attachments

  • 20210713_014808109_iOS.jpg
    20210713_014808109_iOS.jpg
    109.9 KB · Views: 42

MarkUps

TYF Newbie
Joined
Jul 15, 2021
Posts
25
Reaction score
22
Does this mean mine is missing the start stop as well? Man this just gets better and better we really lucked out with this truck on the lot. There's a good chance that I went and test drove this thing and it was starting and stopping on me I would not have driven it home. I seriously cannot stand this start-stop nonsense.

Screenshot_20210715-223648_Gallery.jpg
 

Forum statistics

Threads
138,118
Posts
1,999,580
Members
103,040
Latest member
CrackerJack135

Latest posts

Back
Top