I'm going to take a peek underneath it first to see if the new sensor worked itself loose; hopefully that is the case and I fix it. If not, I'm taking it in Wednesday for an oil leak fix and I'll see if they can scan it then.
What did you do to your OBS GMT400 Tahoe/Yukon Today?
- Thread starter 96ProCompTahoe
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I'm going to take a peek underneath it first to see if the new sensor worked itself loose; hopefully that is the case and I fix it. If not, I'm taking it in Wednesday for an oil leak fix and I'll see if they can scan it then.
Chevrolado
Full Access Member
Got some freeway miles on the new motor. Only about 60 miles, but still good to see how it performs at freeway speeds. Cruising at ~70mph, just under 2k RPM, just purring along.
I need to adjust the timing a little further to get it closer to 0. It has a little issue of pinging when I step on the throttle to pass someone when cruising at about 60-65. Before it kicks down in gear it starts pinging..
I need to adjust the timing a little further to get it closer to 0. It has a little issue of pinging when I step on the throttle to pass someone when cruising at about 60-65. Before it kicks down in gear it starts pinging..
SwampHound
Full Access Member
Sank it yesterday. Hopefully have it out today or tomorrow.
Sent while drivi-
Sent while drivi-
Chevrolado
Full Access Member
Whooops..
Oops is right! Are your nerf bars heavy-duty enough to act as rock sliders? I've looked at the website but can't get a feel for how sturdy they are, particularly the mounts.
Gzes
the drifting 2dr
It got stuck in that little? Had the 2dr up to the doors once n got it out by engaging 4 hi
SwampHound
Full Access Member
Its not in mud, its in water. The other side is what sank down. If I didn't I have an open rear diff it probably wouldn't have happened.
Sent while drivi-
---------- Post added at 03:17 PM ---------- Previous post was at 03:16 PM ----------
They bolt to the rockers, so probably not strong enough to act as rock sliders.
Sent while drivi-
Sent while drivi-
---------- Post added at 03:17 PM ---------- Previous post was at 03:16 PM ----------
They bolt to the rockers, so probably not strong enough to act as rock sliders.
Sent while drivi-
Mine is up on the rack getting an alignment. The shop called and said the ball joint boots are cracking. He said they aren't worn, but I'll have to be vigilant with greasing them and keeping an eye on them.
He told me that just the boots can't be replaced and I'd have to replace the whole thing when they're ready. The "Energy Suspension 3.18124 Hyperflex Master Kit" says it includes ball joint dust boots. Is that something different?
He told me that just the boots can't be replaced and I'd have to replace the whole thing when they're ready. The "Energy Suspension 3.18124 Hyperflex Master Kit" says it includes ball joint dust boots. Is that something different?
99YukonSLT
Full Access Member
Put a new belt and tensioner on the other day after work. It'd been squeaking all winter and driving me nuts.
GTOHOE
TYF Newbie
- Joined
- Dec 11, 2013
- Posts
- 9
- Reaction score
- 0
I put new door pins and bushing in,new GM door handle outside,lock actuators both front doors. installed my new led bumper lights projector headlights and my DDM HID 6k w/upgraded harness..broke DR door handle inside think the rods need some grease order DR/PS inside handles 
I got a bunch of parts to install been buying parts all winter and its starting to warm up!! been at it since 11 am till 10 pm ohhh even got my rear wiper working and new 14'' wiper blade on..Winning i like my black led bumper lights gives the ole hoe a newer look. My headlights have halos and i'm not to into it..Kinda to ricey for me IMO..
I got a bunch of parts to install been buying parts all winter and its starting to warm up!! been at it since 11 am till 10 pm ohhh even got my rear wiper working and new 14'' wiper blade on..Winning i like my black led bumper lights gives the ole hoe a newer look. My headlights have halos and i'm not to into it..Kinda to ricey for me IMO..
Last edited:
SunlitComet
OBS Jedi-Do Good
i would verify that with energy first.
bowtiefreak
No Quarter
Today will be new disks and pads (EBC rotors, Hawk LTS pads)
chaingun427
OBS Mad Scientist
Started installing the aux fuse box under the center console
Sent from my SAMSUNG-SGH-I537 using Tapatalk
Sent from my SAMSUNG-SGH-I537 using Tapatalk
I will but it came from their site. The internet doesn't lie, right
Bummer. For some reason it came on their site, but it is actually for a 2WD. Dagnabbit.
retorq
Full Access Member
Ordered matching rims and tires for the front. Went with 255/50/18s on Mamba M13s up front, 265/60/18s out back for that old school raked look.
Ooooh, I like those. No love for rotating them, though!
retorq
Full Access Member
They get rotated every day when I drive.
I had the "last" oil leak fixed yesterday and an alignment done. The shop checked out the P0430 code and told me it was a faulty cat...no shit. They did say that the other cat had been replaced but the bad one is the most difficult one. They said it would be easier to put a whole new system in but I don't need to do it until it needs an emission test.
First time at this shop and they seemed like good, honest folk. Time will tell.
---------- Post added at 09:36 AM ---------- Previous post was at 09:33 AM ----------
Touche'
First time at this shop and they seemed like good, honest folk. Time will tell.
---------- Post added at 09:36 AM ---------- Previous post was at 09:33 AM ----------
Touche'
