What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[PG01]

Shook my head at it….
11 years old, 110k, clear on hood is going bye bye, rock chip in drivers door, someone opened door in passenger side fender right on the body line, door moldings are starting to peel, needs struts and springs from me plowing with it, needs rear shocks, frame looks like garbage, but i love this thing for some reason.

Oldest daughter is away at college and my #2 child just got her license a few weeks ago so shes the tahoe princess now… lol

 

[PG01]

1 more from this morning

 

[89Suburban]

Shook my head at it….
11 years old, 110k, clear on hood is going bye bye, rock chip in drivers door, someone opened door in passenger side fender right on the body line, door moldings are starting to peel, needs struts and springs from me plowing with it, needs rear shocks, frame looks like garbage, but i love this thing for some reason.
View attachment 442283View attachment 442287View attachment 442284View attachment 442285View attachment 442286
Oldest daughter is away at college and my #2 child just got her license a few weeks ago so shes the tahoe princess now… lol

What head unit is that?

 

[PG01]

What head unit is that?

Amazonion…. Lol . #1 child complaining about Bluetooth and apple carplay b.s. so i got a cheap wireless carplay unit from amazon… i think it really is called ion. Came with a dash cam, extra camera and a small odb (lol) scanner. Its actually not that bad.

 

[kbuskill]

Amazonion…. Lol . #1 child complaining about Bluetooth and apple carplay b.s. so i got a cheap wireless carplay unit from amazon… i think it really is called ion. Came with a dash cam, extra camera and a small odb (lol) scanner. Its actually not that bad.

Dang, look what the cat drug in. Always good to see some of the old timers pop in. Hope you are doing well. Still love your avatar, but what is not to love... lol

 

[PG01]

Dang, look what the cat drug in. Always good to see some of the old timers pop in. Hope you are doing well. Still love your avatar, but what is not to love... lol

Hey Ken, long time no type…..lol…hows it goin buddy. All good up here. Gotta love Ol’ Glory bud … ‘Murica. Maybe ill hang out little, always fun trollin the tyf but i got a little tired of the whole phone/internet thing..

 

[YuCanada]

Swapped my 375s, G5 tails, escalade applique, $20 escalade mirrors from my beater to my $750 denali beater lol

 

[kbuskill]

Hey Ken, long time no type…..lol…hows it goin buddy. All good up here. Gotta love Ol’ Glory bud … ‘Murica. Maybe ill hang out little, always fun trollin the tyf but i got a little tired of the whole phone/internet thing..

I understand, I have taken a step back myself, I still lurk but don't post as often.

 

[Grady_Wilson]

Swapped my 375s, G5 tails, escalade applique, $20 escalade mirrors from my beater to my $750 denali beater lol

View attachment 442293

I would totally rock that as a winter beater, especially for that price.
Is it AWD?

 

[Doubeleive]

I would totally rock that as a winter beater, especially for that price.
Is it AWD?

probably, almost all of them are I only saw 1 rwd when I was shopping for mine and when I test drove it there was something wrong with the transmission I think the torque converter was jacked up, it drove but as soon as you let off the pedal it would slow to a crawl, wouldn't coast at all.

 

[Grady_Wilson]

I did see quite a few RWD Denalis when I was looking for mine almost 2 years ago.
But that was in So Cal where no one really uses an AWD or 4WD vehicle.

 

[Charlie207]

Currently working to fix some plastics damage. Pulled the front bumper cover (what a stoopid design) and broken lower supports. I was able to use a heat gun to soften the plastic, and pop the big dents out of each side, then flatten out the creases. Now I'm getting the lower supports cleaned up and am going to try to "weld" them back together with my soldering iron. Luckily they are made of the same material as the intake manifold - PA w/glass-fiber reinforcement - so I should be able to make it work.

I have some PA60 (basically nylon) cooking utensils left over from fixing the cracked intake manifold from my donor 6.0, and can cut up pieces to make patches & reinforce. Wish me luck and lots of ventilation.

I'm still look a passenger side running board, cause the replacments on ebay are nuts... $400+, although did see an "Make an offer" part for under $200 shipped, so I reached out. Still no luck finding one locally via car-parts.com's website, Faceballs, or cracklist.

I thought I wrecked the driver's side foglight, but i just smacked the bumper hard enough that it popped the bulb out, and I found that it all still works, so that's cool.

 

[Charlie207]

Surgery was a success, and time will tell if it stays together, but I got all the broken and bent bits put back together. Here's one of the brackets that had all three bosses snapped off, after finishing my soldering iron procedure.

Also found a "name your price" deal on a used running board from fleabay. The fiance said I could deduct the damage from the house fund, because it was her idea to go off the road and down down down the trail, so that's cool.

 

[blondie70]

Well....how did the pistol shoot ??

 

[Charlie207]

Flawless through the first 100 rounds, which is a pleasant surprise. Running S&B 230gr FMJ right now, and then will try some JHPs against the wishes of JMB himself.

 

[Doubeleive]

Surgery was a success, and time will tell if it stays together, but I got all the broken and bent bits put back together. Here's one of the brackets that had all three bosses snapped off, after finishing my soldering iron procedure.

View attachment 442397

Also found a "name your price" deal on a used running board from fleabay. The fiance said I could deduct the damage from the house fund, because it was her idea to go off the road and down down down the trail, so that's cool.

View attachment 442398

for future reference, Butler is a haggler if you see they have something on ebay just call them and make a deal over the phone instead

 

[Charlie207]

for future reference, Butler is a haggler if you see they have something on ebay just call them and make a deal over the phone instead

I did the e-haggle, and offered them $20 less than asking. It has free shipping also.

Looking at the other used running boards, which are all hundreds of dollars more, I didn't want to play scumbag-lowball, and lose out.

 

[Doubeleive]

I did the e-haggle, and offered them $20 less than asking. It has free shipping also.

Looking at the other used running boards, which are all hundreds of dollars more, I didn't want to play scumbag-lowball, and lose out.

there usually about a $100 each side around here, $29.99 at pick-n-pull
last time i bought from butler i needed a mirror they had one listed for like $225 or something like that I called them up gave them the item number and asked whats the best price? and the guy took a $100 off and free shipping, ok deal
the problem with shipping a running board though is the size, probably cost $75 plus a long box
some places will just shrink wrap bigger stuff and send it but then you risk the shipping guys being in a hurry and f-ing it up.

 

[Charlie207]

there usually about a $100 each side around here, $29.99 at pick-n-pull

Yeah, I called around to the few that are within driving distance, and there aren't any. If there were some decent options for rocksliders I'd consider them. But the regular step-sides/nerf bars all look kind of dumb.

 

[Doubeleive]

Yeah, I called around to the few that are within driving distance, and there aren't any. If there were some decent options for rocksliders I'd consider them. But the regular step-sides/nerf bars all look kind of dumb.

I drove about an hour for my last one, yard had a few one was in pretty good shape but was still bolted on and they wanted there "guy" to pull it and he proceeded to jam a forklift arm into the bottom of it, wasn't too bad I took it anyway and filled it in with some epoxy it's on the bottom so can't see it.