-
-
GGrady_Wilson reacted to gooffeyguy's post in the thread Shops refusing to disassemble magneride strut with
Like.
Which setup is that? Those thin Harbor Freight one's will bend and those little pins that are supposed to hold the spring in the hook... -
GGrady_Wilson replied to the thread Need to Replace Upper Control Arms and Ball Joints.Some great info in here. Posting so I can come back to it in the future.
-
GGrady_Wilson reacted to Dustin Jackson's post in the thread Need to Replace Upper Control Arms and Ball Joints with Like.
I would recommend doing the entire arm as that includes the bushings and balljoints, I would do upper and lower while in there: Upper...
-
GGrady_Wilson reacted to gooffeyguy's post in the thread Need to Replace Upper Control Arms and Ball Joints with Like.
I'd suggest to also pick up a couple replacement upper mounting bolts, and possibly a couple alignment cam plates. The bolts are flat on...
-
GIf I could math, I'd be more successful and would be trolling a totally different car forum.
-
GGrady_Wilson replied to the thread Front license plate bracket?.I've been trying to source a front license plate bracket for my 2011 Yukon Denali and have been coming up empty. I'll have to see if...
-
GGrady_Wilson replied to the thread Wanted 86-93 Mustang Notchback.Those Colonnade Malibus are finally getting some love these days.
-
GGrady_Wilson reacted to Geotrash's post in the thread (cont) new stock z55 suspension mysteries with Like.
Chiming in a little late here. I had a similar set of problems and error messages when I redid the front suspension on my '07 back in...
-
GGrady_Wilson replied to the thread 2009 Tahoe LTZ Keyfob.I have seen where the pads for the most used buttons on key fobs go bad over time. That would be the lock and unlock buttons, of course...
-
GUpdate on the body swap. I had to give up on it. Two friends were going to help. One passed away and the other was informed hi wife was...
-
GGrady_Wilson reacted to opfor2's post in the thread D-pillar replacement vent (not the cover) with Like.
https://www.gmpartsdirect.com/oem-parts/gm-body-pressure-relief-valve-15816854 I need to replace the drivers side also and ordered two...
-
GI recently got a 2010 retired GSA silver 2500 Suburban. I bought a used front grille guard off a tahoe from a police auction. It is...
-
GI have a '07 2500 Suburban that over the last 2 years I've been tinkering with building it to just what I want for a fun hunting...
-
GIf you have a GM V-8, especially an LS+ series, chances are that you need a catch can. This is common knowledge but there are always...
-
GGrady_Wilson replied to the thread Aftermarket bumper/grill guard 2011 Tahoe.There are remarkably few options for the Yukon as far as full cover guards go. I have been thinking about one since there are tons of...
-
-
Loading…
-
Loading…
