My thoughts exactly! 6.2 time in that sweet little RCSB..!
What did you do to your NNBS GMT900 Tahoe/Yukon Today?
- Thread starter phattyford
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Definitely something amiss with that listing...! 130k / 2500 / 2009 / 6.0.. for under 12k...?!? I call BS.
Kee Fuller
Full Access Member
Kee Fuller
Full Access Member
He doesn’t have a lot of followers. I doubt he’s making anything.
gooffeyguy
Tom
I replaced my torn and greasy shift boot with the one I bought from Sam Harris [emoji41]
While I had the lower dash panel off I cleaned up/rerouted some of the factory wiring that was hanging down to the left of the OBD port.
Appaerntly, the harness that ran to the upfitter box was routed in front of the BCM and around it to the right. Then the big square plug that's supposed to be in front of the BCM was hanging down a bit just to the left of the OBD port.
Sent from my SM-G930V using Tapatalk
While I had the lower dash panel off I cleaned up/rerouted some of the factory wiring that was hanging down to the left of the OBD port.
Appaerntly, the harness that ran to the upfitter box was routed in front of the BCM and around it to the right. Then the big square plug that's supposed to be in front of the BCM was hanging down a bit just to the left of the OBD port.
Sent from my SM-G930V using Tapatalk
Much better! Way to go!I replaced my torn and greasy shift boot with the one I bought from Sam Harris [emoji41]
While I had the lower dash panel off I cleaned up/rerouted some of the factory wiring that was hanging down to the left of the OBD port.
Appaerntly, the harness that ran to the upfitter box was routed in front of the BCM and around it to the right. Then the big square plug that's supposed to be in front of the BCM was hanging down a bit just to the left of the OBD port.
Sent from my SM-G930V using Tapatalk
Geoffsfas10
Full Access Member
Nighttime with red dome lights is soooo much less of a shock to the eyes
gooffeyguy
Tom
I think one of the authentic experts on the subject doesn’t fancy husbanding a novice through a bunch of analog problems..
Kee Fuller
Full Access Member
we were all novices at one point. Hell i asked a boatload of basic questions on here when i first got my Tahoe. I’ve learned so much here and I’m still learning.
Tonyrodz
Resident Resident
Everybody is a noob once.
FYP: cuz for most of us, once definitely doesn’t cut the noob out .!!
I shouldn’t have spoken for any of the authentic experts here, but for certain, none have ever been miserly with their advice or experience. I totally agree helping noobs is what this place is all about.
I can only speak for myself. If I were one of the real experts on modding these trucks, offering advice and experience to someone whose motivation is making a buck creating interesting YouTube content would be a very different thing, versus someone whose motivation was getting the truck they always dreamed of.
The latter would be rewarding, the former not as much.
swathdiver
Full Access Member
Much easier on the eyes, ran all of our angle head flashlights this way for decades. Remember Das Boot?
avalonandl
Full Access Member
Much easier on the eyes, ran all of our angle head flashlights this way for decades. Remember Das Boot?
Without a doubt the BEST Sub movie out there !!!!
avalonandl
Full Access Member
Where did you get the LED's at ?
Why red? I have an idea but don’t want to assume!
