Pictures?
What did you do to your NNBS GMT900 Tahoe/Yukon Today?
- Thread starter phattyford
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
My almost 14 yr old son helped me change the fluids in the front and rear differentials today.
Tomorrow, we might try and get the transfer case fluid and tranny pan drop/filter swap done.
Tomorrow, we might try and get the transfer case fluid and tranny pan drop/filter swap done.
osiris94ej
Full Access Member
Still needs a bath...
Getting closer on the new Airlift 3H air management system on the Silverado; rear hard lines and ride height sensors installed, manifold/ecu mounted, compressors wired up, a few more things done.
Tonyrodz
Resident Resident
Starting them off right
X2Starting them off right
You’re terrible about posting pictures!
Excellent work Dad!
Thanks.
It was kind of funny when he cracked the rear cover off and smelled that gear oil for the first time.
Nothing like your first smell of gear oil lol.
iamdub
Full Access Member
I faintly remember the smell of the first rear cover I ever cracked. Front cover, too. A man I was made that day.
Tonyrodz
Resident Resident
I was thinking the same thing lol.
gooffeyguy
Tom
Removed the front bumper cover to install new headlights
2001 Yukon SLT
2012 Yukon Denali XL
2011 Yukon Denali RIP 5/20/18
2001 Yukon SLT
2012 Yukon Denali XL
2011 Yukon Denali RIP 5/20/18
CHOO CHOO
BackPagePhil
Looks good imo. Let us know how the light output isRemoved the front bumper cover to install new headlights
2001 Yukon SLT
2012 Yukon Denali XL
2011 Yukon Denali RIP 5/20/18
swathdiver
Full Access Member
Hey Phil, how's yours running?
CHOO CHOO
BackPagePhil
Good still. Need to do an oil change though. I need to pull the manual and see what else needs done as well. Around 180k (instrument cluster still not working so not sure) and I'm sure there is some stuff that needs done. I still want to do the ball joints, I ask the mechanic every inspection how they are and if they need replacing. Says they are fine still so I let them go. I will definitely change them next year if he says they are still good. (Still factory that I know of and no issues that I notice)
I did pull the instrument cluster yesterday and boxed it up to ship to someone this week to fix the odometer and gear selector lights. Hopefully get that back by early next week. It definitely is weird driving with no cluster. Google maps tells speed so I'm fine with it. Or I could drive the wife's Jeep.
swathdiver
Full Access Member
Good. I vaguely remember that you had an engine problem of some sort, did it work itself out? I've been kicking my ball joints down the road too. Alignment shop said I needed them and the boots are cracked but not leaking. Probably do them after the Texas run.
completed a drain/fill on the coolant and power steering fluid. I did the suck and fill method on the PS fluid several times until it became lighter in color, I think i went through about 5 quarts of fluid. Dont know if that was better than disconnecting the line and pumping it out that way...??? Anyhoo I "rinsed" the coolant out....let it drain, filled with distilled water, let it run for a little bit with the heat on high and drained again. Went ahead and replaced the lower radiator hose while I was in there, hose looked a little suspect. I still need to rotate tires and I think i'll finally be done for a while.
yep need to see some nightime shots of the light on those, are the projectors hid or led? or regular bulbs? where did you get them? link?Removed the front bumper cover to install new headlights
2001 Yukon SLT
2012 Yukon Denali XL
2011 Yukon Denali RIP 5/20/18
gooffeyguy
Tom
See the 07-14 Yukon Headlights post in the Exterior forum for more pics and info
2001 Yukon SLT
2012 Yukon Denali XL
2011 Yukon Denali RIP 5/20/18
