What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[R3cord303]

My Amazon one unscrews at the bottom for draining/cleaning. The “dipstick” is handy I guess but I don’t accumulate enough between oil changes to worry about it. Fittings are ok, hose was garbage.

EVIL ENERGY Baffled Universal Oil Catch Can Reservoir Tank Breather Filter Kit https://www.amazon.com/dp/B07F393WYN/ref=cm_sw_r_cp_api_i_D4ZrDb08JFFMF

This one looks like its higher quality than the Tasan Racing one. I can't tell if it has that brass mesh filter inside the baffles or not. I almost want to get this one and then a sheet of that brass filter mesh and put some in between the final two baffles that look like they come apart. Its not much more expensive and looks to be of way higher quality.

 

[Ilikemtb999]

This is very true. The only thing I don't like about the $85 one on catchcans.com is that the lower section doesnt unscrew so the only way to clean it all the way out is by taking the whole thing off. I think the 3" one on that site does have the base that unscrews- but its expensive. The Tasan Racing amazon special does have the lower section that unscrews. So that's nice.

The one I posted has a check valve at the bottom. No unscrewing necesssry.

I did pipe sealant all fittings and lube the o-ring that holds it together. Has been working great.

 

[Doubeleive]

LOL, talked me into one finally, after looking at quite a few I found this one $25 on amazon with a dipstick @CHOO CHOO haha
https://www.amazon.com/Ruien-0046-U...6XK9PTP7/ref=cm_cr_arp_d_product_sims?ie=UTF8

reviews are good for the most part, people say it smells or appears used but it's just laced with cutting fluid from china so it needs a little clean out and deburring and better hose but an overall effective cheap can

 

[Doubeleive]

Used this paint pen thing to cover up a couple chips/scratches, works ok I'll call it a 6ft pen, lol

 

[Rocket Man]

Used this paint pen thing to cover up a couple chips/scratches, works ok I'll call it a 6ft pen, lol

View attachment 228137

Those things suck lol.

 

[Doubeleive]

Those things suck lol.

well it's better than looking at a big black spot, did one on my drivers mirror and edges of the doors, cheaper than a paint job, lol

 

[R3cord303]

LOL, talked me into one finally, after looking at quite a few I found this one $25 on amazon with a dipstick @CHOO CHOO haha
https://www.amazon.com/Ruien-0046-U...6XK9PTP7/ref=cm_cr_arp_d_product_sims?ie=UTF8

reviews are good for the most part, people say it smells or appears used but it's just laced with cutting fluid from china so it needs a little clean out and deburring and better hose but an overall effective cheap can

Thats the same one I’m gonna get just sold under a different name

 

[wjburken]

Used this paint pen thing to cover up a couple chips/scratches, works ok I'll call it a 6ft pen, lol

That’s a 50/50 product. Looks good from 50 feet away at 50 mph.

I’ve had some luck taking some 600grit DA sandpaper to it to even put the lumps.

 

[gooffeyguy]

03 Tahoe doesn't.

My 01 Yukon has an aluminum liftgate. Magnet no sticky

2001 Yukon SLT
2012 Yukon Denali XL
2011 Yukon Denali RIP 5/20/18

 

[Rocket Man]

well it's better than looking at a big black spot, did one on my drivers mirror and edges of the doors, cheaper than a paint job, lol

View attachment 228138

Yep that doesn’t look bad, I tried one on a door chip and hood chips but it looked worse after because it was all raised up. I don’t know wth Im doing.

 

[HiHoeSilver]

Yep that doesn’t look bad, I tried one on a door chip and hood chips but it looked worse after because it was all raised up. I don’t know wth Im doing.

Same.

 

[Tonyrodz]

Yep that doesn’t look bad, I tried one on a door chip and hood chips but it looked worse after because it was all raised up. I don’t know wth Im doing.

Same. Mine looked like a bunch of raised moles. I think if they're wet sanded once they're dried it wouldn't look bad.

 

[the_tool_man]

I used this touch up paint with acceptable results:

https://www.amazon.com/dp/B01N22JMJ9/ref=cm_sw_r_cp_apa_i_7KasDbYBBCJJ9

I had a 3/8" paint chip on the lift gate where a PO apparently tried to close the rear glass on something. Two coats of color plus two coats of clear blended pretty well. I'll try to post a pic later. It's raining here at the moment.

 

[avalonandl]

I take it you haven’t seen the extensive discussions here?

No, too new.....

 

[osiris94ej]

Took it out on an adventure over the weekend with street tires. Haha.

Sent from my SM-N950U using Tapatalk

 

[Rocket Man]

Took it out on an adventure over the weekend with street tires. Haha.

Sent from my SM-N950U using Tapatalk

Beautiful pictures. Almost looks like Oregon’s high desert.

 

[osiris94ej]

Beautiful pictures. Almost looks like Oregon’s high desert.

Just out in Wyoming. Couple from Casper mountain, and a couple from the Fremont canyon area.

Sent from my SM-N950U using Tapatalk

 

[gooffeyguy]

Got my Tech 2 delivered today and just sat playing around with it in the vehicle to get familiarized with it

 

[Doubeleive]

surprise surprise the mechman finally shipped today, should have it friday

 

[esoteric_ast]

Spent a couple of hours driving around after trimming rear wheel wells. Set up the TPMS sensors. The 2/4 drop rides real nice. Haven’t even hit the bump stops without free travel mod.