What did you do to your NNBS GMT900 Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

HiHoeSilver

Away!
Joined
Feb 28, 2017
Posts
10,918
Reaction score
14,578
Location
Chicago
Just curious... I notice alot of you guys get the milky looking oil out of your catch cans... do you guys do a lot of short trips around town???

The reason I ask is mine never looks like that but I live kinda out in the sticks so trips are probably longer.

I know the milky oil is caused from moisture/condensation in the crankcase from heating and cooling and it's nothing major like a bad head gasket or anything but I was just curious.

I also make it a habit to remote start my truck and allow it to get up to operating temperature before driving it as well... perhaps that helps too.

Mine is always normal looking...
View attachment 218164

I was kind of wondering the same thing I would be a bit worried if something like that was showing up, I haven't put a catch can in (yet) thought about it but if mine is using any oil it has to be pretty minuscule oil level stays the same between oil changes L94


Mine was only like that one time when my OCI fell in the dead of winter. I was a bit worried, but no other signs of trouble. Next time was back to normal.

20180227_184719.jpg



Yes, that's what I was talking about when I said that after the drainage sits for a while in the bottle it gets noticeably darker.





Makes total sense. Total Homer Simpson D'oh moment. I just wasn't thinking about the system correctly.



Side, side, side note. I noticed that the drainage from my catch can has more of a fuel'ish smell to it than I expected. Not sure that means anything. Just an observation.

Mine too. Normal. The vapor has fuel in it.
 

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,679
Reaction score
52,949
Location
Oregon
The way the air flows through the motor, that line on the passenger side is a clean air inlet INTO the motor. There's nothing for a catch can to catch. Look at it this way: Passenger side is the mouth that breathes in, the crankcase is the stomach/****** and the driver's side is the butthole that farts out the nasty stuff. The catch can is the filter in the hose with which GM connected the butthole to the engine's "tracheotomy" so it can inhale it's own wet farts instead of spewing them into the environment.


:sunot:
 

the_tool_man

Full Access Member
Joined
Oct 15, 2018
Posts
837
Reaction score
1,994
Location
Upstate South Carolina
These came in the mail last week.

https://www.amazon.com/gp/product/B07GCT7X8L/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

Been raining or too cold until yesterday. Got them out of the box only to find out they're designed to fit an Esky. Sure, they'll mount, and work electrically. But they need Esky appliques. That's what I get for updating my sig prematurely. Who's ordered G4 taillights and had them actually be the right shape? Got a link? Thx.

Talking to myself here, for posterity I guess. All the "correct" ones I've found on eBay are either ugly or cost double the G5 style. It's a little cheaper to buy a pair of Esky appliques and be done with it. I was gonna have my appliques and new fully-illuminated CHMSL painted body color anyway. So now I can have them done without driving around appliqueless.

Interesting aside, the Amazon seller didn't even know there were differences in shape between Esky and everything else. He asked for pictures. So hopefully, he'll update the ad so no one else has this misunderstanding.
 

rex450se

TYF Newbie
Joined
May 30, 2018
Posts
26
Reaction score
30
Location
Independence, MO
Got the second screen wired in before we leave Sunday for about 3000 miles of driving next week. Gotta keep the kids happy. Since the IR headphones no longer work with an after market headunit I added 2 Bluetooth transmitters so the kids can use whatever Bluetooth headphones they want.

A8533AC1-D01A-4703-8C4B-609614F6AC07.jpeg
 

juan84

Full Access Member
Joined
Jul 15, 2012
Posts
192
Reaction score
240
Location
Mounds view MN
Just got my led fog lights in the mail we'll see how these do they have good reviews on YouTube!! Unlike the opt 7 brand just kept going out so I finally gave up and going to try these
ef1f995e3f70502238ef62fba5fe13c3.jpg


Sent from my SM-G920T using Tapatalk
 

Hi-psi

Full Access Member
Joined
Mar 10, 2018
Posts
305
Reaction score
455
Location
Atlanta, GA
I live in an apartment complex, so sometimes depending on where I end up parking my remote start may or may not work due to distance. And then at work it definitely doesn't due to distance.

I'm not really interested in adding a complete aftermarket alarm/remote start system just to get a smartphone app option. I know that GM makes an extended range remote start system/add on, but I'm not really digging that either.

I was going to use the MyGM app/OnStar approach, but the VCIM I swapped into my '08 Denali to get Bluetooth handsfree apparently is black listed and can't be activated (I tried).

So, I was wondering if anyone has, or knew of any type of add on system that interfaces with the factory remote start system and extends it's functionality to having a smartphone app. Even if there's a minimal monthly or yearly service involved. I'm more interested in something that has an easy install, still uses the factory key fobs for normal operation, etc.
 

Chrismnj

Full Access Member
Joined
Sep 17, 2015
Posts
1,227
Reaction score
2,121
Location
NJ
I live in an apartment complex, so sometimes depending on where I end up parking my remote start may or may not work due to distance. And then at work it definitely doesn't due to distance.

I'm not really interested in adding a complete aftermarket alarm/remote start system just to get a smartphone app option. I know that GM makes an extended range remote start system/add on, but I'm not really digging that either.

I was going to use the MyGM app/OnStar approach, but the VCIM I swapped into my '08 Denali to get Bluetooth handsfree apparently is black listed and can't be activated (I tried).

So, I was wondering if anyone has, or knew of any type of add on system that interfaces with the factory remote start system and extends it's functionality to having a smartphone app. Even if there's a minimal monthly or yearly service involved. I'm more interested in something that has an easy install, still uses the factory key fobs for normal operation, etc.

Aren't you able to start the truck with Onstar app from any where in the world?
 

swathdiver

Full Access Member
Joined
May 18, 2017
Posts
21,299
Reaction score
30,254
Location
Treasure Coast, Florida
I live in an apartment complex, so sometimes depending on where I end up parking my remote start may or may not work due to distance. And then at work it definitely doesn't due to distance.

I'm not really interested in adding a complete aftermarket alarm/remote start system just to get a smartphone app option. I know that GM makes an extended range remote start system/add on, but I'm not really digging that either.

I was going to use the MyGM app/OnStar approach, but the VCIM I swapped into my '08 Denali to get Bluetooth handsfree apparently is black listed and can't be activated (I tried).

So, I was wondering if anyone has, or knew of any type of add on system that interfaces with the factory remote start system and extends it's functionality to having a smartphone app. Even if there's a minimal monthly or yearly service involved. I'm more interested in something that has an easy install, still uses the factory key fobs for normal operation, etc.

Viper? @Doubeleive
 

Hi-psi

Full Access Member
Joined
Mar 10, 2018
Posts
305
Reaction score
455
Location
Atlanta, GA
Aren't you able to start the truck with Onstar app from any where in the world?

I was going to use the MyGM app/OnStar approach, but the VCIM I swapped into my '08 Denali to get Bluetooth handsfree apparently is black listed and can't be activated (I tried).

That route isn't an option. Since pre-'09 didn't come with factory hands free Bluetooth, as many have done, I swapped in a VCIM from an '09+ vehicle to add that functionality. The problem is that the VCIM is also for OnStar, so from the OnStar side they think your vehicle is whatever that VCIM came out of. Generally no big deal. But, apparently there's also another scenario where the ID of that VCIM box is black listed. Maybe it's due to if the original vehicle was a theft recovery, or some other circumstance. But bottom line, the VCIM I have can't be activated for OnStar service, which means no MyGM app for me.
 

Chrismnj

Full Access Member
Joined
Sep 17, 2015
Posts
1,227
Reaction score
2,121
Location
NJ
That route isn't an option. Since pre-'09 didn't come with factory hands free Bluetooth, as many have done, I swapped in a VCIM from an '09+ vehicle to add that functionality. The problem is that the VCIM is also for OnStar, so from the OnStar side they think your vehicle is whatever that VCIM came out of. Generally no big deal. But, apparently there's also another scenario where the ID of that VCIM box is black listed. Maybe it's due to if the original vehicle was a theft recovery, or some other circumstance. But bottom line, the VCIM I have can't be activated for OnStar service, which means no MyGM app for me.


https://www.tahoeyukonforum.com/threads/smartstart-4g-dsm5500-so-much-faster.110449/

I think you need to change alarm to use smart start

Edit.

I know some viper starters have a range of 2 miles.
 

Hi-psi

Full Access Member
Joined
Mar 10, 2018
Posts
305
Reaction score
455
Location
Atlanta, GA


I'm aware that there are numerous aftermarket alarm/remote start systems that have the "start from anywhere" ability via smartphone apps.


My original question posed was however if anyone was aware of a product that interfaces with the existing factory GM keyless entry/remote start system to extend it's functionality to include that ability.

This is a little pricey, and there aren't any reviews, but it at least claims to do what I'm describing.

https://www.amazon.com/Smartphone-Remote-Start-2007-2014-Sierra/dp/B07CZNKQGJ
 

kbuskill

***CAUTION*** I do my own stunts!
Joined
Mar 11, 2017
Posts
5,825
Reaction score
9,836
Location
NE. FL.
Got the new 3 chamber Magnaflow XL put on the Burb today... also removed the factory resonator out by the tail pipe and replaced the factory tip with a 4" stainless tip straight out the back...
rps20190308_153008_622.jpg

That is 3 feet of muffler there ladies and jelly spohns.
rps20190308_153050.jpg

A pic from behind.
rps20190308_153116.jpg

And one from the side.... I'm still not 100% about the tip location... some angles it looks good, some it looks funny... I think I'm just not used to seeing it there.

Here is a better pic of the Y-pipe I had built as well...
rps20190308_153423_456.jpg

This is where the original Y-pipe joined together right before the transmission crossmember by the transmission pan.

rps20190308_153551_529.jpg

And here is where the new longer Y-pipes come together in front of the next crossmember which is about 1.5'- 2' further back.
 

07Burb

GM fan for life
Staff member
Moderator Supporting Member Administrator
Joined
Jan 3, 2011
Posts
50,943
Reaction score
19,372
Got the new 3 chamber Magnaflow XL put on the Burb today... also removed the factory resonator out by the tail pipe and replaced the factory tip with a 4" stainless tip straight out the back...
View attachment 218249
That is 3 feet of muffler there ladies and jelly spohns.
View attachment 218250
A pic from behind.
View attachment 218251
And one from the side.... I'm still not 100% about the tip location... some angles it looks good, some it looks funny... I think I'm just not used to seeing it there.

Here is a better pic of the Y-pipe I had built as well...
View attachment 218252
This is where the original Y-pipe joined together right before the transmission crossmember by the transmission pan.

View attachment 218253
And here is where the new longer Y-pipes come together in front of the next crossmember which is about 1.5'- 2' further back.
How's she sound?
 

Chrismnj

Full Access Member
Joined
Sep 17, 2015
Posts
1,227
Reaction score
2,121
Location
NJ
Got the new 3 chamber Magnaflow XL put on the Burb today... also removed the factory resonator out by the tail pipe and replaced the factory tip with a 4" stainless tip straight out the back...
View attachment 218249
That is 3 feet of muffler there ladies and jelly spohns.
View attachment 218250
A pic from behind.
View attachment 218251
And one from the side.... I'm still not 100% about the tip location... some angles it looks good, some it looks funny... I think I'm just not used to seeing it there.

Here is a better pic of the Y-pipe I had built as well...
View attachment 218252
This is where the original Y-pipe joined together right before the transmission crossmember by the transmission pan.

View attachment 218253
And here is where the new longer Y-pipes come together in front of the next crossmember which is about 1.5'- 2' further back.
Nice welds.
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
30,569
Reaction score
48,055
Location
Stockton, Ca.
I'm aware that there are numerous aftermarket alarm/remote start systems that have the "start from anywhere" ability via smartphone apps.


My original question posed was however if anyone was aware of a product that interfaces with the existing factory GM keyless entry/remote start system to extend it's functionality to include that ability.

This is a little pricey, and there aren't any reviews, but it at least claims to do what I'm describing.

https://www.amazon.com/Smartphone-Remote-Start-2007-2014-Sierra/dp/B07CZNKQGJ
looks like it works with the factory fob and presuming you already have factory remote start, but it doesn't say anything about "extending" the factory remote only that it works with there app. found 2 reviews one said they often had to re-log into the app to use it.
you can get directed smartstart without having to add a entire alarm system I am pretty sure anyway. you can look on there website and build a system online to see what it would involve.

maestro has a system too and you can build a system on there website as well
 

Forum statistics

Threads
137,801
Posts
1,992,521
Members
102,790
Latest member
Korbin_A

Latest posts

Back
Top