The white part stays attached to the inside convenience center. It has two screws holding it in, circled in blue below as best as I can remember. The upper right screw is already removed in the photo. The second one is diagonal to it and hidden from view in the photo.
Then loosen the torx bolt inside the black part (red arrow) and pry that part off. I don’t remember if the bolt was captive or not.
When the black part is pulled off, push the white part through the firewall into the cab. The various wires connected to the stuff under the hood will go with it.
Here’s the white part (circled in red) once the dash is out.
Sent from my iPhone using Tapatalk