Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
They gave me the same load of crap. Tell them to point to where in the manual it says the automatic lights are supposed to come on in bright light for safety reasons.just took my car in, they are in fact going to order a new light sensor and indicated that they spoke with GM engineers and they claim the lights are working properly but because there was an error code during diagnostics, they will replace. The service department maintains that the lights are working properly. I didn’t want to get into an argument about it, so hoping once the sensor is replaced the daytime lights will turn on during bright light.
Seems like this issue isn’t fully identified by GM yet and we’re just experiencing the early stages of what likely could be a recall item later.
They tried to tell me the headlights should be on during bright light for safety reasons but couldn’t seem to answer how that would be safe for oncoming vehicles. The point of daytimes are to help ensure car is visible but not blind others… strange.
Would you be able to drop the link to the instructions or video that you found?I took my 2022 Suburban in the other day and I waited for 4 hours just to have them tell me I would have to bring it back for a further look. I told them it is just the sensor. They told me that GM forces them to go through the wiring. What CRAP!! Because of this post I ordered my own sensor, which I will get in 3 days. For $16, including shipping it is worth every penny not to deal with the frustration of my dealer.
As far as installation I looked at what it would take and it is not much at all. Maybe a 5 min job. Just pop the panel up and replace.
Can you share ordering info for the sensor? Web link, PN?I took my 2022 Suburban in the other day and I waited for 4 hours just to have them tell me I would have to bring it back for a further look. I told them it is just the sensor. They told me that GM forces them to go through the wiring. What CRAP!! Because of this post I ordered my own sensor, which I will get in 3 days. For $16, including shipping it is worth every penny not to deal with the frustration of my dealer.
As far as installation I looked at what it would take and it is not much at all. Maybe a 5 min job. Just pop the panel up and replace.
Sensor is bad. Needs to be replaced. You are correct on what it is supposed to look like.Sorry for this stupid question but please confirm my understanding. I think my low beam headlights are also incorrectly on during bright sunlight (switch is set to Auto). A short phone call and description to my local service dept said they are functioning as they are supposed to. I don't think he is correct.
To avoid descriptive errors on my part, here are a couple example pictures to illustrate...
What my headlights look like in bright sunlight:
View attachment 370557
What I believe my headlights (DRLs) are SUPPOSED to look like in bright sunlight:
View attachment 370558
I have Yukon and part ending in 621 is what fixed my issue.Thank you. Looks like PN 13545621 is for Tahoe. PN 13529378 is for Yukon....I think?
Try a different dealer?Well, replaced the sensor and it is till doing it, dealership is utterly useless. Any thoughts? Lol
This is literally the same thing that happens to me. Did you ever get any resolution?When I left my office today, the sun was a little lower and the trees were blocking direct sunlight so the Daytime Running Lights came on as they should. As I pulled out of my office and headed down the street where the trees are cleared, the sunlight was able to directly hit my sensor and my headlight indicator on the dash came on. Definitely either a bad sensor or a software issue.
Did you fix it yourself?I have Yukon and part ending in 621 is what fixed my issue.