Pwtr02ss home build

[tuckerrnr1]

this shit aint built yet

Where you been?

 

[89Suburban]

this shit aint built yet

 

[pwtr02ss]

this shit aint built yet

New fone who dis

 

[pwtr02ss]

Well, whatcha think @randeez

 

[randeez]

Well, whatcha think @randeez

needs more house

 

[pwtr02ss]

needs more house

workin on it. hopefully they get started soon.

Glad to see you peaking in. Hope you've been well, homo

 

[randeez]

Where you been?

been busy

 

[pwtr02ss]

been busy

still have the V?

 

[Grady_Wilson]

How the heck did I miss this thread?

Well, I have some catching up to do.

 

[pwtr02ss]

Plans are officially out for pricing, have been since end of last week.

Grading guy moved equipment back out today. He said he's got a dozer back out there and moving an excavator tomorrow. Hopefully get the logs moved offsite and start final (rough) grade. We talked through what I want and I'm going to meet him tomorrow after work if everything goes smoothly.

Slow process

 

[pwtr02ss]

Went out there this afternoon. Freeze thaw is real. Top two inches of the pad were sticky mud. Didn't sink, just slid across it. Muddy mess of an avalanche.

Strapped the muck boots on an we rough staked the shop pad. They gonna have to redo about 50' of fill to get the slopes right for runoff. Not the end of the world, just one more slow down.

They'd started regrading the driveway and right side. It's all still too wet.

We talked through what I want. Hope it'll dry out at some point

 

[randeez]

still have the V?

yea couple more things done to it, full bolt-onish at this point, ported blower/103mm tb, had a 10l90 fall in my lap pretty cheap so it got swapped in also still. im having some mystery cyl6/8 misfire/problems i think the head gasket is on its way out. those two plugs look like theyre burning a little coolant, but not enough to notice

 

[pwtr02ss]

yea couple more things done to it, full bolt-onish at this point, ported blower/103mm tb, had a 10l90 fall in my lap pretty cheap so it got swapped in also still. im having some mystery cyl6/8 misfire/problems i think the head gasket is on its way out. those two plugs look like theyre burning a little coolant, but not enough to notice

Very nice. Bet that ****** rips. Yukon?

 

[randeez]

Very nice. Bet that ****** rips. Yukon?

Yukon has been parked, back to sort of stock ride height.
It runs and drives but needs some refreshing. Engine has been abused for several years and is tired, ring tension is kinda gone, transmission is pretty fresh in it, has a 263hd transfer case in it atm, no front diff, rear pinion needs new crush washer/reset. I bought a holley and some new injectors for it, but it just needs a lot to get it to hold its own with the new wave of trucks/suvs.

 

[pwtr02ss]

Yukon has been parked, back to sort of stock ride height.
It runs and drives but needs some refreshing. Engine has been abused for several years and is tired, ring tension is kinda gone, transmission is pretty fresh in it, has a 263hd transfer case in it atm, no front diff, rear pinion needs new crush washer/reset. I bought a holley and some new injectors for it, but it just needs a lot to get it to hold its own with the new wave of trucks/suvs.

Glad to hear you're still wrenching. Missed you around these parts, if you couldn't tell from my months of checking in...fu-cker

Hopefully you'll stick around and I can finally get those parts installed...someday.

Ps, good morning

 

[89Suburban]

Glad to hear you're still wrenching. Missed you around these parts, if you couldn't tell from my months of checking in...fu-cker

Hopefully you'll stick around and I can finally get those parts installed...someday.

Ps, good morning

love is in the air...

 

[pwtr02ss]

love is in the air...

Missed my scissor sister

 

[randeez]

 

[THE YETI]

All these updates and still no house. Get your own thread

 

[pwtr02ss]

View attachment 474758

Don't look like no Yukon ta me