Opinions on Potential Hybrid Mods ...
- Thread starter soulsea
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
How bout just wait till it's on and modify at that point. Takes literally 3 minutes to install the rear bumper.
Well, if I need to lower my exhaust tips I'd rather get that done before I swap bumpers only to find out I have to swap back twice more just to get the exhaust lowered first.
---------- Post added at 07:02 PM ---------- Previous post was at 07:00 PM ----------
Btw, does it really take 3 minutes ... I was worried about mucking up the reverse sensors.
felixgun
Full Access Member
I used my original sensors. Took my paint body shop guy way more then 3 minutes though...
Well, if I need to lower my exhaust tips I'd rather get that done before I swap bumpers only to find out I have to swap back twice more just to get the exhaust lowered first.
---------- Post added at 07:02 PM ---------- Previous post was at 07:00 PM ----------
Btw, does it really take 3 minutes ... I was worried about mucking up the reverse sensors.
well, if you measure with good faith, get the bumper, and find out that measurement was off, then you just wasted time and more money. Sit patient until it gets there and then worry about it.
Took me 2 minutes to yank the ESV bumper off. 2 7mm screws in the rear fenders, 2 10mm (IIRC) under the truck, and 4 plastic grommets along where the liftgate closes. Wallah.
- Joined
- Jan 3, 2011
- Posts
- 50,938
- Reaction score
- 19,344
I'm pretty sure those sensors just snap in, serge. Shouldn't be a big deal.
lol you guys make me laugh ... the question isn't 'should' they just snap into the bumper, it's 'do' they?
take ur happy ass outside and reach under there and find out! LOL
felixgun
Full Access Member
Sorry I can't find a measuring tape anywhere
Yes it's easy to snap in your existing sensors into the new bumper. My paint guy has done many GMT900 vehicles so he knew it like the back of his hand and it still took 15-20 minutes. He had all tools ready and never stopped. That time include taking my original bumper off.
Yes it's easy to snap in your existing sensors into the new bumper. My paint guy has done many GMT900 vehicles so he knew it like the back of his hand and it still took 15-20 minutes. He had all tools ready and never stopped. That time include taking my original bumper off.
Still no one to simply measure the side of a bumper for me?
On another random idea, I was thinking about something that's been bothering my ocd for some time ... this is not a very good pic but I'll use it to show you what I'm talking about:
Here's another one from a stock HyHoe:
If you guys notice the font of the 'Hybrid' marking is different from the 'Tahoe' font. That really really bugs me ... and I don't want to debadge it cause I like a little chrome element on my tailgate to go with the pending esky bumper install.
So I was thinking one of three options:
1. Take out the Hybrid and 2 mode rectangle on the right, leave the Tahoe on the left, and call it a day.
2. Same as above but get creative and take out the H from Tahoe on the left and substitute it with the H from Hybrid.
3. This is the option I would really love to do if possible. Take out the Hybrid lettering and 2 mode rectangle from the right, find lettering with the same font as Tahoe, and use those to spell hybrid on the right.
No. 3 would create perfect symmetry in font and location.
So, is there a place one can find these exact letters pre taped so I can do the third option?
If not, which of the first two options do you prefer?
Thanks
---------- Post added at 10:46 PM ---------- Previous post was at 10:19 PM ----------
Oh, I should point out that the thin blue line sticker is already gone.
On another random idea, I was thinking about something that's been bothering my ocd for some time ... this is not a very good pic but I'll use it to show you what I'm talking about:
Here's another one from a stock HyHoe:
If you guys notice the font of the 'Hybrid' marking is different from the 'Tahoe' font. That really really bugs me ... and I don't want to debadge it cause I like a little chrome element on my tailgate to go with the pending esky bumper install.
So I was thinking one of three options:
1. Take out the Hybrid and 2 mode rectangle on the right, leave the Tahoe on the left, and call it a day.
2. Same as above but get creative and take out the H from Tahoe on the left and substitute it with the H from Hybrid.
3. This is the option I would really love to do if possible. Take out the Hybrid lettering and 2 mode rectangle from the right, find lettering with the same font as Tahoe, and use those to spell hybrid on the right.
No. 3 would create perfect symmetry in font and location.
So, is there a place one can find these exact letters pre taped so I can do the third option?
If not, which of the first two options do you prefer?
Thanks
---------- Post added at 10:46 PM ---------- Previous post was at 10:19 PM ----------
Oh, I should point out that the thin blue line sticker is already gone.
- Joined
- Jan 3, 2011
- Posts
- 50,938
- Reaction score
- 19,344
I'm still of the notion you debadge the gate. If not debadge both the "Tahoe" and the Hybrid emblem debadge one of them. Problem solved.... 
I've never seen a nnbs truck completely debadged in the rear, black emblem, but with an esky bumper ... I'm thinking it will look really odd.
---------- Post added at 10:59 PM ---------- Previous post was at 10:58 PM ----------
Do you guys know if one can buy lettering with that font?
---------- Post added at 10:59 PM ---------- Previous post was at 10:58 PM ----------
Do you guys know if one can buy lettering with that font?
- Joined
- Jan 3, 2011
- Posts
- 50,938
- Reaction score
- 19,344
X2
Serge....why do you think it'd look odd debadged with the esky bumper?
just cuz of the chrome strip?
I've never seen a nnbs truck completely debadged in the rear, black emblem, but with an esky bumper ... I'm thinking it will look really odd.
you never what?
