Kelderman air ride

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Frey522

TYF Newbie
Joined
Jun 25, 2014
Posts
18
Reaction score
0
Hi everyone,

I have been doing ALOT of research and I think I may have found an airbag replacement for our coil springs. Its from Kelderman suspensions.

The kid they make is for the 2007-2014 Tahoe suburban, and Yukon. But after doing some looking at their installation instructions. and climbing under my Tahoe many times. I think it may work.

If anyone knows if the rear end is the same or different, and what is different about it please let me know.

Ill be calling kelderman tomorrow to see what they say.

here is a link to the kit.
http://kelderman.com/gmt900_tahoe_yukon_denali_escalade_lowering_kit_air_suspension_rear

thanks
 
OP
OP
F

Frey522

TYF Newbie
Joined
Jun 25, 2014
Posts
18
Reaction score
0
SWEET ! are you 100% sure? it just a big $ risk and work load.

my hope is to do this rear airbags and then front coil over conversion from Atomic.
Just need to purchase the springs and shocks to go with it.
 

Ben

Full Access Member
Joined
Sep 19, 2009
Posts
2,702
Reaction score
24
Location
PCB, FL
If he says they'll work they'll work... :roflbow:
 

NathanJax

Vacation Nathan
Staff member
Administrator Moderator Supporting Member
Joined
May 9, 2009
Posts
49,141
Reaction score
943,577,203
Location
Jax, Fl
The rear will work.

SWEET ! are you 100% sure? .



Yes he's sure. He works at Kelderman, he had this setup on his old Yukon. I have that setup on my Yukon, and others no this site use or have used it before as well. Do a search for Kelderman on here and there is plenty of info.... Info on mine can be seen by clicking the picture in my signature.
 
Last edited:

yates ™

Resident Apple hater
Joined
Jul 9, 2010
Posts
24,413
Reaction score
6,448
Location
Iowa
As far as I know the rear has not changed through the NBS and NNBS.
 

yates ™

Resident Apple hater
Joined
Jul 9, 2010
Posts
24,413
Reaction score
6,448
Location
Iowa
where would the compressor assembly mount in a NBS?

The easiest option would be we could do is what we call a wireless one, it is a small compressor with with a valve block and wireless remote. The compressor can be installed where ever you would like or have room. The remote shows the pressure you have in the bags and pressure can be adjusted from the wireless remote. This system uses a one way valve so the two rear bags will pressure adjust after the valve.

Picture of the remote
pb-wirelessone-controller.jpg


Picture of the compressor, link to compressor specs
325C_big.png
 
Last edited:

livingez_123

Full Access Member
Joined
Feb 18, 2013
Posts
1,799
Reaction score
114
Location
Sandy, OR
I wonder if they would just do the rear kit with no compressor?

What lbs are the bags rated at?
 

yates ™

Resident Apple hater
Joined
Jul 9, 2010
Posts
24,413
Reaction score
6,448
Location
Iowa
I wonder if they would just do the rear kit with no compressor?

What lbs are the bags rated at?

$600 for the rear brackets and bags. I am not finding the rating for those bags but I will get you this info shortly.
 

07Burb

GM fan for life
Staff member
Moderator Supporting Member Administrator
Joined
Jan 3, 2011
Posts
50,968
Reaction score
19,479
:lol2:
 

07Burb

GM fan for life
Staff member
Moderator Supporting Member Administrator
Joined
Jan 3, 2011
Posts
50,968
Reaction score
19,479
Does it make ya shake your ass, Brandon?
 

Forum statistics

Threads
138,106
Posts
1,999,234
Members
103,032
Latest member
albac

Latest posts

Back
Top