3/5 kit options

[thor1125]

im looking into getting a 3/5 kit.. i have access to a djm 3/5 kit complete shicks lower arms rear coils etc.. for 200 bucks... or should i go with the mcgaughys 3/5 kit which is just drop spindles and rear coils etc. what are the pros/cons of each one... i either wanna run 24 or 26 inch wheels.. depending if the 26s would fit? whatcha think.... all input is neded thanks in advance..

 

[LazyAssLou]

let me buy the djm if you don't go with it

 

[Modded]

Yeah I would go with the DJM kit.

 

[Narco]

Djm

 

[yargnits]

I'd like to lower my AWD truck too but don't care to swap out the factory wheels. I'll go with different tires tho. I want it more for the handling benefit, not the looks.

 

[thor1125]

???

with the djm 3/5kit do i have to run aftermrket wheels right away? all i have now is my stock 16s..lol and dont wnna have to wait to put the kit on .

 

[matt14]

No you have it mixed up. With a spindle drop, you have to run at least a 17" wheel. I have the djm kit and ran my stock 16's for a couple of months before i got wheels. Thats a hellla good deal for 200. jump on it. If you dont, let me know cause a friend of mine looking for a 3/5 kit and is going to L.A this weekend

 

[NORCAL SS]

Go with djms.

remember the rear kit has
trailing arm brackets
shock extenders
the kit for the swaybar endlinks
and yes the spring

---------- Post added at 10:04 PM ---------- Previous post was at 10:03 PM ----------

also i would change out the front bushings on the control arms.

 

[thor1125]

??

change out the front bushing on the control arms to what .. also what hd shocks should i run .. prolly ditch the djm ones cuz i want a nice ride... all this is temporary though .. until i finish some other project then on with the bags on my tahoe .. thanks everyone

 

[NORCAL SS]

djm bushing kit in front.

try the djms then go from there