What did you do to your NNBS GMT900 Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

kbuskill

***CAUTION*** I do my own stunts!
Joined
Mar 11, 2017
Posts
5,825
Reaction score
9,836
Location
NE. FL.
I ordered a Nokia DT-900 Wireless charger.

I chose this charger because it has 3 coils and runs directly off of 12V so there is no adapter or USB port needed to install it. It also does not use any power while there is no device laying on it, so no worries of it getting to hot or draining the battery on the Burb while it's not being used.

I installed it in the center console lid and wired it directly to the back of the rear cigarette lighter port in the console.

Only took this one pic with the rubber off so you can see it.

rps20190512_213325_151.jpg


The hole isn't perfect as I couldn't find the proper cutting tool for my "dremel".

I also cleaned the crud off of it before reinstalling the rubber mat... didn't realize that crud was there until I removed the mat... its amazing what hides beneath... lol
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
30,563
Reaction score
48,043
Location
Stockton, Ca.
Anyone here installed this yet? ive got the Alpine X009GM looks amazing on the dash but the software is pretty outdated and boring thinking about trying this.

https://www.phoenixautomotiveinc.co...roid-navigation-radio-for-gmc-yukon-2007-2014

View attachment 222868
I don't think any members have but it was mentioned recently and there was a video review for it on another truck a ford I think but one of the caveats is the hvac will not come on until you manually turn it on once the system has booted each time, unless that has been resolved that would be a major no thanks for me.
 

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,679
Reaction score
52,949
Location
Oregon
Anyone here installed this yet? ive got the Alpine X009GM looks amazing on the dash but the software is pretty outdated and boring thinking about trying this.

https://www.phoenixautomotiveinc.co...roid-navigation-radio-for-gmc-yukon-2007-2014

View attachment 222868
Get one of the new units from someone like Pioneer that have wireless Apple Carplay or wireless Android Auto. I just bought one and it’s amazing. Combine it with a Maestro module and you can display and control lots of your vehicle controls through the OBD. I wouldn’t turn over my cars HVAC controls to something like that. What happens if that unit has a problem? You lose entertainment plus heat and ac?
 

iamdub

Full Access Member
Joined
Apr 23, 2016
Posts
20,821
Reaction score
45,012
Location
Li'l Weezyana
Just noticed today that the passenger side rear window switch doesn't put the window up (puts it down fine) ..... Lol.

My daughter had the window down but couldn't put it up. The drivers switch put it up fine. Guess it's a bad switch??

2001 Yukon SLT
2012 Yukon Denali XL
2011 Yukon Denali RIP 5/20/18

I found out yesterday during the trip home that the left rear window of mine did the same. I worked the switch roughly up and down while wiggling until it worked again. It's probably dirty/slightly corroded contacts from lack of use. Regular use of switches keeps the contacts clean. I may take it apart and clean them with some electrical contact cleaner.
 
Joined
Apr 11, 2018
Posts
7,124
Reaction score
14,375
Location
St. Louis
I found out yesterday during the trip home that the left rear window of mine did the same. I worked the switch roughly up and down while wiggling until it worked again. It's probably dirty/slightly corroded contacts from lack of use. Regular use of switches keeps the contacts clean. I may take it apart and clean them with some electrical contact cleaner.
After reading this today, I popped the switch out, unplugged it and removed it from the trim housing, then opened it up and sprayed electrical contact cleaner in it. Then put it back together and plugged it in and it's working fine, both up and down!

Thanks for the tip!

2001 Yukon SLT
2012 Yukon Denali XL
2011 Yukon Denali RIP 5/20/18
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
30,563
Reaction score
48,043
Location
Stockton, Ca.
Thanks, we appreciate that. I just wanted to make sure you knew we have the phone support, if anyone needs it.
I Bought this autocal used, I have downloaded your software, can I delete these old 2014 files from the previous owner or format the data? so I can connect it to my truck and get the files you guys need.

EFI2.JPG
 

jsoltren

Full Access Member
Joined
Mar 9, 2018
Posts
159
Reaction score
95
Cabin air filter! Dorman 259-201 cabin air filter retrofit kit. I removed the trim panel on the passenger side of the center console (two metal clips and one plastic clip) and the passenger kick plate (three screws). Then I cut the panel cover using a utility knife since I couldn't get my dremel in there. It took about an hour, and about 80 passes with the knife to slice through.

https://www.amazon.com/dp/B00NF1SK1M/

Some people use this as an opportunity to wash and flush the radiator that's right there. I didn't bother.
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
30,563
Reaction score
48,043
Location
Stockton, Ca.
does anybody have the part number for the febreeze scented cabin air filter, i guess it's fresh breeze

Nvm found it: Cabin Air Filter-Freshbeeze Fram CF11809
 
Last edited:

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
30,563
Reaction score
48,043
Location
Stockton, Ca.
Those are made by FRAM. ACDelco with carbon is CF193C.
I think I have the carbon one installed, I'm going to try the fram one with arm & hammer, I thought there was a febreeze scented one but I think it was just the deceptive fram advertising on the package
 

kbuskill

***CAUTION*** I do my own stunts!
Joined
Mar 11, 2017
Posts
5,825
Reaction score
9,836
Location
NE. FL.
I think I have the carbon one installed, I'm going to try the fram one with arm & hammer, I thought there was a febreeze scented one but I think it was just the deceptive fram advertising on the package

You should send me the carbon one your not using... oh and the cover too, I'll need the cover.... lol
 

swathdiver

Full Access Member
Joined
May 18, 2017
Posts
21,299
Reaction score
30,254
Location
Treasure Coast, Florida

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
30,563
Reaction score
48,043
Location
Stockton, Ca.
You should send me the carbon one your not using... oh and the cover too, I'll need the cover.... lol
I will check tomorrow when the febreeze one comes if it's still in usable condition you can have it, you can get the door/cover off ebay pretty cheap
 

Forum statistics

Threads
137,783
Posts
1,992,167
Members
102,777
Latest member
wwiizz
Back
Top