What did you do to your OBS GMT400 Tahoe/Yukon Today?

[SunlitComet]

you have to remove rear brace to fit it and get a new proper belt or it will be over tensioned. to remove brace, accessory brack on that side needs to be move forward to get one bolt out of back of brace. 30 minutes work total.

---------- Post added at 03:34 PM ---------- Previous post was at 03:31 PM ----------

for vortec 350 with 140 amp alt.

 

[kaoticlife]

I had replaced the stock 105 amp about 3 months ago with an ad244 from eBay and I guess it just decided to give up. Had it tested this am and it failed..asked the Guy to run the test 3 times to make sure and it failed all 3 times. So bought one for 147 and some change hooked it up and all good now!

sent from tapatalk2 using rabbit ears and aluminum foil.

 

[VicYukon]

Today I just took my Yukon(stormtrooper) to get full carwash in and out. Then went out for a drive and eat with the family.

 

[slipping]

Fabbed up my TV bracket

 

[19 tahoe 97]

just got in from playing in the snow with my truck.

 

[VicYukon]

Today I started and finished up painting my upper concole took me about 20 mins what you guys think?

 

[xanatost]

Put in MSD distributor, Hoe hit 170,000

 

[SunlitComet]

still not done mine yet. just sitting in the truck awaiting a install issue response from msd.

 

[SunlitComet]

well msd say even with synthetic oil in the engine just put the included lube pack on the dizzy and drop it in.

 

[19 tahoe 97]

put a piece of cardboard in front of the radiator because of the cold. helps mpgs a bit and it stops knocking sooner.

 

[kaoticlife]

Walked out of the gym and found a puddle of antifreeze. The heater hose from top of engine with the o-ring fitting was pissing everywhere. Damn radiator,alternator and now this. No one had the hose so had to make it work til I can get one here. While doing that the heater bypass valve fell apart in my hand and of course they didn't have one of those either...all on order

sent from tapatalk2 using rabbit ears and aluminum foil.

 

[slipping]

Bought these:

did this:

 

[_Dylan_]

I hate tinting. I saw a vid on youtube last week and I was doing it wrong. lol

 

[slipping]

I'm gonna learn how to do it. I was forced to remove mine because a bored ass chp gave me a ticket foe it.

 

[Gzes]

Damn you shoulda told the cop to go eat a donut and shut it. I luckily did my tint fairly lighr so i dont get pulled over for it but my explorer is like beyond illigal and have never been pulled over for it. My tahoe is always getting pulled over tho. Stupid reasons because they are bored and ignorant

 

[slipping]

truck was tinted when i bought it. where i live i have no problem with the tint. drive by sheriff and chp all day long. but where i work the county mounties there have very little to do and i usually catch where they are in time and roll the windows down but was just too late this time. Ill tint them again later on, just with lighter tint.

 

[_Dylan_]

I wanna put 20 on the front windows and 50 on the windshield.

here is the video I was talking about:
http://www.youtube.com/watch?v=M7UOQq3h2s8

 

[Gzes]

Tinting is not hard just takes a lil time. When they did my my 2dr i was there and saw the process in person and they used razor blades. I could do it myself but they did the whole 2dr for $70 so i was fairly happy

 

[xanatost]

Window tinting is pretty hard to do. Not done right you will get bubbles and crapy tint will turn purple. My buddie been doing it for 20 years and can make pictures with tint all free hand. If tinting was easy then anyone could do it. Just saying


Oh installed my MSD distributor on today

 

[slipping]

that homie in the video makes it look so easy!