noJeepshere
Full Access Member
Probably needed to help his buddy that was injured...you need help to do an intake?
cent frum a smaert fone
What did you do to your OBS GMT400 Tahoe/Yukon Today?
- Thread starter 96ProCompTahoe
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
cent frum a smaert fone
Gzes
the drifting 2dr
Yea had to close the shop for the day and it was about to be weekend so just gonna do it Monday
96ProCompTahoe
Full Access Member
Looked at it in the garage and put it on the float charger. Haha
chaingun427
OBS Mad Scientist
200k today and still purring like a kitten. Going to recharge the ac in a few
chaingun427
OBS Mad Scientist
Recharged the ac and dug into my flapper door issue, seems like the linkage came apart on the flapper door because the rod going through the assembly that flapper is mounted to has come loose on the passenger side of the assembly. Does anyone have a diagram of how that all should be assembled?
SunlitComet
OBS Jedi-Do Good
flapper door on the passenger side of the assembly? you mean the recirc door? this may or may not help.
http://www.gmpartseast.com/diagrams/large/53C/ac-heater-module-asm-tc0904501.png
---------- Post added at 07:19 AM ---------- Previous post was at 07:14 AM ----------
if you mean the air directional out servo i have a picture of raptor93's servo layout.
http://www.gmpartseast.com/diagrams/large/53C/ac-heater-module-asm-tc0904501.png
---------- Post added at 07:19 AM ---------- Previous post was at 07:14 AM ----------
if you mean the air directional out servo i have a picture of raptor93's servo layout.
chaingun427
OBS Mad Scientist
No the servo is good, it appears to be part 26, it came disconnected somehow on the right side opposite the servo. Because of the servo arm came disconnected. I should be able to fix it once I get the door back in place
Ty for the diagram its gimma be a big help
Ty for the diagram its gimma be a big help
SunlitComet
OBS Jedi-Do Good
chaingun427
OBS Mad Scientist
SunlitComet
OBS Jedi-Do Good
well the door should be keyed somewhat to the shaft so if you orient the linkages as in the pic you should be fine. or did the door break away from the shaft?
need new retainer? http://www.gmpartsgiant.com/parts/gm-retainer-52469557.html
need new retainer? http://www.gmpartsgiant.com/parts/gm-retainer-52469557.html
chaingun427
OBS Mad Scientist
Door is still on the shaft, I was able to set it mostly where it belongs, and reconnected the linkage but the far side its still not where it belongs. Its it possible to get to the passenger side of the box without pulling the dash?
SunlitComet
OBS Jedi-Do Good
chaingun427
OBS Mad Scientist
I'll give that a try ty
chaingun427
OBS Mad Scientist
Wow my truck handles great considering I just noticed I'm completely missing a front sway bar link...
SunlitComet
OBS Jedi-Do Good
bad move.
---------- Post added at 09:29 PM ---------- Previous post was at 09:02 PM ----------
scored me a snap-on mt2500 scanner with cartridges for 96-2001 gm, ford, chrysler and the fastrak troubleshooter. has 16 personality keys as well as the cable and three interfaces for obd-2, gm-1 aldl and a nissan one as well. obviously not all the stuff that the kit originally had but i paid $160 for it. it reads abs so far but not looked into functional test command yet. it will read pcm stuff but i have 411 pcm so i fiddle the vin setting on scanner and i have functional tests of 411 pcm as well can alter state or iac, fuel relay, egr, a/c relay,evap, case relearn, fuel trims and a host of other things.
---------- Post added at 09:30 PM ---------- Previous post was at 09:29 PM ----------
has a case too.
---------- Post added at 09:31 PM ---------- Previous post was at 09:30 PM ----------
---------- Post added at 09:29 PM ---------- Previous post was at 09:02 PM ----------
scored me a snap-on mt2500 scanner with cartridges for 96-2001 gm, ford, chrysler and the fastrak troubleshooter. has 16 personality keys as well as the cable and three interfaces for obd-2, gm-1 aldl and a nissan one as well. obviously not all the stuff that the kit originally had but i paid $160 for it. it reads abs so far but not looked into functional test command yet. it will read pcm stuff but i have 411 pcm so i fiddle the vin setting on scanner and i have functional tests of 411 pcm as well can alter state or iac, fuel relay, egr, a/c relay,evap, case relearn, fuel trims and a host of other things.
---------- Post added at 09:30 PM ---------- Previous post was at 09:29 PM ----------
has a case too.
---------- Post added at 09:31 PM ---------- Previous post was at 09:30 PM ----------
noJeepshere
Full Access Member
Nice score!
cent frum a smaert fone
cent frum a smaert fone
SunlitComet
OBS Jedi-Do Good
thanks i think i will pick up maybe the obd1 cartridges since i have the adapters. at least the gm one anyway. not likely to spend money on ones i won't ever use. nice to have a scanner with mode 8 control.
95escahoe
Full Access Member
- Joined
- Aug 2, 2010
- Posts
- 5,162
- Reaction score
- 4,466
Replaced the wiper motor, replaced the wiper linkage bushings and replaced the defective wiper cowl
SunlitComet
OBS Jedi-Do Good
damn thing has a light pin/knock/tap sound yesterday. in sync with engine speed. kinda feels like a cylinder is effected and for what might have been a brief moment i had a minor power kick so i think i am dealing with a lifter issue. will tell over time as i get into the issue. need to inspect my spark plugs for damage anyway.
