What did you do to your OBS GMT400 Tahoe/Yukon Today?

[retorq]

Bro do you even lift.

 

[slipping]

lift looks good man!

 

[SPLmonster13]

Hahaha thanks dudes, need the 37s

 

[redaddiction]

Mine has 100 miles just put a new alternator on so it's all like new.

Really has 124k

 

[Gzes]

Gonna get a ranch hand rear bumper today

 

[qukon 95]

I had a hissing sound under the hood and i found the rubber elbow
that connects the pcv tube to the throttle body and another vacuum
hose was cracked replace them still had the hissing.... the gasket
under the throttle body was bad . I did notice a ruff idle for awhile
now it idles smooth and i will drive it mon. Then wed i decided
to replace the leaking heater hose connector that mounts on top of
motor by ign coil i put socket on it and it broke with a peice still threaded in the intake(DAM) it took 2 hrs vacuuming out
all the peices and using my inspection camera to make sure i got
them all out the intake . got the new one threaded in no leaks!!!

 

[Gzes]

Picked up the ranch hand

 

[slipping]

played with plastidip pearlizer

 

[Donnie Yukonie]

How does the pearlizer hold up scott? looks good, And that lift looks bad ass man What did you go with?

 

[slipping]

so far so good. havent installed it yet, just a little trim bezel on my console. I put up more pics in my build thread. i want to check it out in the daylight to see what it looks like.

 

[retorq]

I had a hissing sound under the hood and i found the rubber elbow
that connects the pcv tube to the throttle body and another vacuum
hose was cracked replace them still had the hissing.... the gasket
under the throttle body was bad . I did notice a ruff idle for awhile
now it idles smooth and i will drive it mon. Then wed i decided
to replace the leaking heater hose connector that mounts on top of
motor by ign coil i put socket on it and it broke with a peice still threaded in the intake(DAM) it took 2 hrs vacuuming out
all the peices and using my inspection camera to make sure i got
them all out the intake . got the new one threaded in no leaks!!!

One of the worse jobs I had to tackle on mine was replacing that piece.

 

[SPLmonster13]

How does the pearlizer hold up scott? looks good, And that lift looks bad ass man What did you go with?

It's just a RCX 6" + 3" body

 

[SunlitComet]

I had a hissing sound under the hood and i found the rubber elbow
that connects the pcv tube to the throttle body and another vacuum
hose was cracked replace them still had the hissing.... the gasket
under the throttle body was bad . I did notice a ruff idle for awhile
now it idles smooth and i will drive it mon. Then wed i decided
to replace the leaking heater hose connector that mounts on top of
motor by ign coil i put socket on it and it broke with a peice still threaded in the intake(DAM) it took 2 hrs vacuuming out
all the peices and using my inspection camera to make sure i got
them all out the intake . got the new one threaded in no leaks!!!

Be gratful it broke instead of destroying the threads unscrewing it.

 

[Phantom240]

Found my mystery coolant leak!
http://youtu.be/X3KLHn8Vbn8

 

[qukon 95]

Hey phantom i had that same leak last yr and i know it could have
been worst replacing that heater hose connector

 

[Phantom240]

How would I go about getting a replacement connector?

 

[Monstar_est87]

That's the heater control valve... Those are notorious for goin bad... Do urself a favor and replace the lines... Those are goin 2 crack next... O and b sure 2 flush out ur heater core i can guarantee its got plenty of crap inside...

 

[Phantom240]

Dude, the entire cooling system needs to be cleaned and flushed, if the rusty color of the filler neck is any indicator lol. Replace all those lines and the control valve, throw some DexCool in there afterward and that system should be trouble free for a while.

 

[kaoticlife]

Happy Holidays TYF!

sent from tapatalk2 using rabbit ears and aluminum foil.

 

[noJeepshere]

Merry Christmas guys!