What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[guy from norcal]

First time I have seen that setup. I have to say its sick as hell. It's simple yet stands out. What's the plans for future mods?

I plan on some new wheels hopefully in a few weeks and a 3-4 drop

and looking at doing some vinyl wrap for some interior pices

 

[enypde]

Is it bad to park the truck unevenly on a snow bank mound?

 

[css49017]

Well she was clean for about 10 mins until I drove it.

Sweet looking truck!

---------- Post added at 01:32 PM ---------- Previous post was at 01:31 PM ----------

just a wash

The white wheels looks very good

---------- Post added at 01:32 PM ---------- Previous post was at 01:32 PM ----------

Ben what else would you use besides vht?

Very cool Tahoe!

---------- Post added at 01:33 PM ---------- Previous post was at 01:32 PM ----------

Hit a gutter on the street at 4am.... oops

like new tires too... now I need another rim.... ideas?

Been there done that, try getting a reman wheel, there under $300

 

[992dr]

I finally got around to cleaning my headlights.
I'm impressed, I think another round and they will be as good as new.
My only complaint would be, the 500 grit discs don't last long at all, 3 is just not enough for our large lights. Otherwise, I'm very happy. I'm going to grab another kit and some headlight lens polish/wax and do them again in a couple of weeks.

I have one question. Look at my drivers side light. Where it meets the fender. Now, look at my passenger light. The passenger is flush with the fender and the drivers side is set back quite a bit.
How do I fix this?
Thanks

 

[07Burb]

Wow those lights were bad! I've not seen them that bad before

Maybe fix the fitment of the light with shims

 

[GalaxyBlackEsky]

I have to agree. Usually you see something this bad on older cars. Not a newer one. But they are pretty bad. You are going to really need to wet sand that then compound buff that out.

 

[NathanJax]

I finally got around to cleaning my headlights.
I'm impressed, I think another round and they will be as good as new.
My only complaint would be, the 500 grit discs don't last long at all, 3 is just not enough for our large lights. Otherwise, I'm very happy. I'm going to grab another kit and some headlight lens polish/wax and do them again in a couple of weeks.

Wow those lights were bad! I've not seen them that bad before:

I have to agree. Usually you see something this bad on older cars. Not a newer one. But they are pretty bad. You are going to really need to wet sand that then compound buff that out.

I would honestly save the money on buying a second kit and just spend the $130 (shipping included) to buy a brand new set. Something like this...

http://www.ebay.com/itm/New-Pair-Se...&fits=Model:Tahoe&hash=item5afbfd7cfe&vxp=mtr

 

[992dr]

The pictures don't really do it any justice, they aren't by any means perfect but the glare from the sun certainly is holding back some of the clarity.

I have to agree, I've never seen any lights this bad before. Especially on a newer vehicle.

Wow those lights were bad! I've not seen them that bad before

Maybe fix the fitment of the light with shims

Seriously, same here.
I'll give that shim idea a try.

I have to agree. Usually you see something this bad on older cars. Not a newer one. But they are pretty bad. You are going to really need to wet sand that then compound buff that out.

I'm going to give it another try, we'll see how they come out.

I would honestly save the money on buying a second kit and just spend the $130 (shipping included) to buy a brand new set. Something like this...

http://www.ebay.com/itm/New-Pair-Se...&fits=Model:Tahoe&hash=item5afbfd7cfe&vxp=mtr

Thanks for the link. Do you happen to know the quality of them?
I've heard some good but more negative about aftermarket headlight assemblies.

Is it true I have to take off the from bumper and grill surround to remove the headlights?
Is there a "how to" on this job?

Thanks guys

 

[Goodinblack]

Removed the roof rack off the Yukon XL as well.

Used these

---------- Post added at 04:38 PM ---------- Previous post was at 04:37 PM ----------

 

[shundal]

Just put in a kirkland group 65 battery from Costco. I've read a lot of good things about their batteries, plus you have an awesome full money back warranty. It's a 850 cold cranking amps/1000 cranking amps and 150 minute reserve for just $93!

 

[Rangel]

Switched to synthetic oil today at 87k and greased all the zerks

Royal Purple HMX with a WIX filter

 

[CrashTestDummy]

Well, not today, but last Sunday. We took it to an autocross:

We normally-drive a 85 Firebird in C Prepared. We're finishing up an engine swap in it, so it's not yet mobile. Since we work registration for the event, we drove up in the Tahoe. We figured while we were there, we'd run it.

It probably weighs twice what anything out there weighs, and running on street tires, we're terribly non-competitive. Still, it was a lot of fun. My wife beat me. We finished last in PAX (an index score to see how you are doing related to everyone else at the event, regardless of class), but finished first and second in C Prepared.

And we still have smiles on our faces from the event.

 

[bigrhino]

Took it to the car wash today.

 

[Nikki'sHoe08]

Put a full tank of gas in, I swear everything I drive it I can't stop thinking about what I want to do to it... I've caught the mod bug... Oh wallet please forgive me

 

[08grey]

Lol. I am guessing no kids yet^^^^

 

[Rangel]

Lol. I am guessing no kids yet^^^^

True words have never been spoken. Lmao.

 

[07Burb]

Lol. I am guessing no kids yet^^^^

I have a gaggle of kids but also think about mods pretty consistently. The speed with which they get done are drastically slowed due to said crumb snatchers

 

[NathanJax]

I have a gaggle of kids but also think about mods pretty consistently. The speed with which they get done are drastically slowed due to said crumb snatchers

 

[07Burb]

Whatchu staring at?

 

[Goodinblack]

I have a farm full of kids but also think about mods pretty consistently.

Fyp