What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[CaptainAmerica1]

Data-logging for BBP tune. Gathering parts for my AFM delete.

 

[Geoffsfas10]

Thanks dawg. So just for your reference I have 5% on the 5 rears and 20% on the front 2 sides. Did it myself so it’s not perfect.

thats what im wanting to do. have 20 on the fronts right now. i want privacy

 

[swathdiver]

Nothing, it's raining! Well, I did prep the new control arms bolts and nuts and cams. Every one of the old plastic inserts for the alignment was intact so I moved them over to the new cams.

 

[Just Fishing]

Soaking my pistons in mineral spirts via my ultrasonic cleaner, heated to 50c for the parts 30min run.
Wiping stuff off for white glove treatment, air hose to dry, then bag and back into the box with a mark!

Machine shop told me my rod bushings were gtg, I was concerned about a score i made on one of them but they said to run it.
Well that one rod was a wee tight on the wrist pin, so a little car polish to smooth the gash out did the trick!

Summit fkd me again, check out showed parts were coming from nevada warehouse...
So me "woot fast ship"
Well tracking number now shows parts are coming from Ohio and Texas...

fkn summit racing.
I don't know what the fk they changed but they need to go back.

 

[George B]

Swapped out my flakey shock today. Left the liner in the wheel well. It was alright but next I Will take it out.

took a reading before I installed it.

 

[NOSOK]

Took the suburban to the dealer yesterday for a coolant flush and the passenger airbag recall.

Of course with a 160k mile truck they gave me a laundry list of repairs, most of them were minor leaks on various lines. Not surprised on those, but what I wasn't expecting is they mentioned the front sway bar links were completely gone. At least that's an easy DIY.

I've had the truck 6 months now with 100s of miles logged on mountain roads and I haven't noticed "excessive" body roll. Maybe it's just perspective as my previous vehicles were smaller and sportier and I expected the Suburban to have extremely boaty handling.

 

[FrankU]

NOSOK if you don't mind what the dealer charge for the coolant flush ?

 

[NOSOK]

NOSOK if you don't mind what the dealer charge for the coolant flush ?

$160 + tax.

 

[Sparksalot]

$160 + tax.

That's about what I paid to have it done at my local shop.

 

[Just Fishing]

More ultrasonic cleaner fun today.
One rod at a time!

Right now only one rod has been attached
I did this one and realized i really needed to wait, no real clean place to store things for a good two weeks.

 

[Doubeleive]

Took the suburban to the dealer yesterday for a coolant flush and the passenger airbag recall.

Of course with a 160k mile truck they gave me a laundry list of repairs, most of them were minor leaks on various lines. Not surprised on those, but what I wasn't expecting is they mentioned the front sway bar links were completely gone. At least that's an easy DIY.

I've had the truck 6 months now with 100s of miles logged on mountain roads and I haven't noticed "excessive" body roll. Maybe it's just perspective as my previous vehicles were smaller and sportier and I expected the Suburban to have extremely boaty handling.

Should not be "boaty" at all, now take a comparable Ford for instance and there you have your wave rider boat, I don't know how people like them at all. My XL has never been boaty even though I upgraded the sway bars and yes a swift move at 90mph does make a wave but it quickly corrects it's self.

 

[lee.solorzano]

I like the tread on those tarrs.

I’m put them for sale.


Sent from my iPhone using Tapatalk

 

[Rocket Man]

Took the suburban to the dealer yesterday for a coolant flush and the passenger airbag recall.

Of course with a 160k mile truck they gave me a laundry list of repairs, most of them were minor leaks on various lines. Not surprised on those, but what I wasn't expecting is they mentioned the front sway bar links were completely gone. At least that's an easy DIY.

I've had the truck 6 months now with 100s of miles logged on mountain roads and I haven't noticed "excessive" body roll. Maybe it's just perspective as my previous vehicles were smaller and sportier and I expected the Suburban to have extremely boaty handling.

I bet it will feel better after they’re replaced.

 

[08z71bgm]

Topped off some e85 today. 2.07. Still haven’t made it to e50 yet. 42.7

 

[Just Fishing]

I tripped over this container that they wife bought to orginize with....
Me,



result!

Now, should i wait to install the piston rings till after i plasti-gauge the rod bearings, or do it before?

I'm guessing i'll probably want to ensure all of the plasti gauge is cleaned up... then final install the bitches.

 

[George B]

Had my G80 lock as I went over the speed bump in the work parking lot. truck didn't want to turn and then it let go again. Must have been just the right combination of speed and angle crossing the bump.

 

[ls1frc]

I cried about my terrible "piston slap"

 

[RooTBeeRthe1st]

Crawled under it and remeasured the space I can cram mufflers in.
Time to make it sound nearly stock and still make 500+whp

 

[Sam Harris]

Crawled under it and remeasured the space I can cram mufflers in.
Time to make it sound nearly stock and still make 500+whp

So.. it’s pretty much expected you include pictures as a general rule. But.. with a post like this ....!?!?

Absolutely MANDATORY...!

Pics, or bannination!!!

 

[Doubeleive]

Had my G80 lock as I went over the speed bump in the work parking lot. truck didn't want to turn and then it let go again. Must have been just the right combination of speed and angle crossing the bump.

It's happened to me once with this 2012 last year I did a hard stop and left turn and she bound up on me for a second, only did it that one time that was right around the time I bought the girdle and cracked it open expecting to find some metal bits in there but there was nothing.