What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[George B]

Mine is broken also, when i bought the hoe the passenger side wire was just flopping everywhere.
I taped it off and stuck it into an interior panel.
Sure would be nice to have it working one day.

How are you re-attaching it?

Frost fighter 2000 epoxy.

 

[Sam Harris]

Giving frost fighter the ol’ college try!

View attachment 264850 View attachment 264856 View attachment 264858

Frost fighter FTW! Don’t even bother with the other garbage!

 

[Miami-Dade]

They put that brine shit down in White Plains Thursday....
I think Wednesday were getting a storm....

That must have been what they used on the Garden State Parkway last December before a storm. Had no idea what it was at the time as there was no snow in sight. Looked like a dust storm on there. Have no idea why they put it down a week before the storm.

 

[Sparksalot]

It’ll be easy they said...

I did the cabin air filter mod to thecopcar. Getting the cover off was super easy, with the right tool.

getting the access panel cut out was a pita on the other hand.

 

[George B]

Frost fighter FTW! Don’t even bother with the other garbage!

No kidding! Thats good stuff! I have continuity through all the tracing across the window now. Super happy!

 

[Tonyrodz]

Giving frost fighter the ol’ college try!

View attachment 264850 View attachment 264856 View attachment 264858

With my luck that rear window would explode with all that heat!

 

[Just Fishing]

Frost fighter 2000 epoxy.

added to my cart.
Please post your thoughts when completed.

 

[ls1frc]

6.2 swapped my 5.3 Yukon, while it was my only vehicle with an impending 12" of snow coming this week LOL. Talk about risk.

 

[George B]

added to my cart.
Please post your thoughts when completed.

All back together and functioning. I am very pleased and impressed. There are good directions on their website too.

I cleaned the area really well, scuffed it with fine scotchbrite and then the sandpaper that came in the kit.

Be careful, the tracing is very thin...

Cleaned it with acetone and masked off an area since my pad was 85% gone. Laid the epoxy on and used my heat lamp and heat gun to cure it for an hour. Took it back out and reinstalled it. Done!

 

[eritzman]

New Arnott struts, shocks, and air compressor.

Sent from my VS995 using Tapatalk