What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[Tonyrodz]

I have one! I obviously don't need it [emoji16]

Lol

 

[GranPrix]

LMFAO

 

[Doubeleive]

LMFAO

question is does the dipstick confirm low oil?

 

[89Suburban]

Hey guys whats up. I just got these two messages on my dash? Should I change my oil??

View attachment 221180 View attachment 221181































Too soon?

Not good!

 

[CHOO CHOO]

question is does the dipstick confirm low oil?

The DIC does too, but he has low oil pressure so it's different. He should put a gauge on there and see if it is up to spec for what the manual says. I heard if you hold your hand over the dipstick thing-a-ma-gigger and it shoots oil out the top, it's good pressure.

 

[Doubeleive]

The DIC does too, but he has low oil pressure so it's different. He should put a gauge on there and see if it is up to spec for what the manual says. I heard if you hold your hand over the dipstick thing-a-ma-gigger and it shoots oil out the top, it's good pressure.

What?...lol no

 

[CHOO CHOO]

What?...lol no

ThE dIpStIcK cAn ChEcK oiL pReSsUrE

tHe JoKe Is On YoU [emoji12]

 

[Doubeleive]

ThE dIpStIcK cAn ChEcK oiL pReSsUrE

tHe JoKe Is On YoU [emoji12]

I asked because if the oil level is to low then the oil pump can't pick it up, once the pressure drops below 10lbs that is when the shut off engine message comes up

 

[CHOO CHOO]

I unloaded my water softener out of it.

 

[HiHoeSilver]

I unloaded my water softener out of it.

You should considerately aim the headlights for your gas guy to see his way to the door tonight.

 

[CHOO CHOO]

You should considerately aim the headlights for your gas guy to see his way to the door tonight.

Haha he showed up around 2ish. Seemed annoyed, idgaf. Same guy from last night. Less than 5 min and done.

 

[CHOO CHOO]

Just replaced the drivers side and passengers side window regulators assembly. Was surprisingly easy. About 20-30 minutes for the first side, then 15-20 for the next once you figure it out. Probably being generous too.

 

[09 L9H]

Finally got a Blendmount for my R3

 

[lowh07]

I have a couple videos of Frosty on a little 50 shot, but I’m forum illiterate. What’s the best way to post them? Files too large

 

[lowh07]

Finally got a Blendmount for my R3

What is this sorcery? I’d like to do the same with my Redline

 

[Tonyrodz]

I have a couple videos of Frosty on a little 50 shot, but I’m forum illiterate. What’s the best way to post them? Files too large

Download to youtube then post the links here.

 

[Tonyrodz]

Download to youtube then post the links here.

 

[lowh07]

Thanks Tony, let’s give this a shot... hopefully it doesn’t look too slow lol

First video is at about 950 psi. I power brake it up to 2k first. Second about 825 (I don’t have a bottle heater). Window switch is set at 3k-5800. You can see and hear a little bump in first video when it gets to 3k.

 

[Tonyrodz]

Thanks Tony, let’s give this a shot... hopefully it doesn’t look too slow lol

First video is at about 950 psi. I power brake it up to 2k first. Second about 825 (I don’t have a bottle heater). Window switch is set at 3k-5800. You can see and hear a little bump in first video when it gets to 3k.

Nice! Love watching that needle head south!

 

[lowh07]

Nice! Love watching that needle head south!

Thanks, she feels very strong. I timed 0-60 at around 6.9. Many people said I wouldn’t notice a 50 shot... I definitely know it’s there. Hesitant to go with the 100 until I have a backup truck since I still have a 4L60....