swathdiver
Full Access Member
And they like that you buy a new one every six months! LOL Just funnin' ya Chris!
What did you do to your NNBS GMT900 Tahoe/Yukon Today?
- Thread starter phattyford
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
And they like that you buy a new one every six months! LOL Just funnin' ya Chris!
gooffeyguy
Tom
Had the two front windows tinted
2001 Yukon SLT
2012 Yukon XL Denali
2011 Yukon Denali RIP 5/20/18
Sent from my SM-G930V using Tapatalk
2001 Yukon SLT
2012 Yukon XL Denali
2011 Yukon Denali RIP 5/20/18
Sent from my SM-G930V using Tapatalk
Finally out of the body shop this afternoon and then I dropped it off around the corner at the chevy dealer, the left front axle is leaking (it's under warranty) and then a alignment, jeez felt like I was driving a new car again for 5 minutes.
gooffeyguy
Tom
Installed the Husky Weatherbeater floor liners/cargo mat. Had to buy a whole new set, the ones from the 2011 swb are different except for the front driver/passenger.
I was missing the front passenger, only had the drivers side. It got misplaced either in the tow yard or at the salvage place the insurance company had it taken to. I contacted Husky to see if I could buy just the one, but they said they're only made and sold in pairs. So I have a spare drivers front mat... Lol
But I do have a full set minus the front passenger available for 07-14 Tahoe/Yukon with middle row buckets and third row bench in black. Second row, aisle, cargo with slots cut-out to mount seats on top..cheap
2001 Yukon SLT
2012 Yukon XL Denali
2011 Yukon Denali RIP 5/20/18
Sent from my SM-G930V using Tapatalk
I was missing the front passenger, only had the drivers side. It got misplaced either in the tow yard or at the salvage place the insurance company had it taken to. I contacted Husky to see if I could buy just the one, but they said they're only made and sold in pairs. So I have a spare drivers front mat... Lol
But I do have a full set minus the front passenger available for 07-14 Tahoe/Yukon with middle row buckets and third row bench in black. Second row, aisle, cargo with slots cut-out to mount seats on top..cheap
2001 Yukon SLT
2012 Yukon XL Denali
2011 Yukon Denali RIP 5/20/18
Sent from my SM-G930V using Tapatalk
Last edited:
sumo
dn ʇǝƃ ʇuɐɔ & llǝɟ ı
Finished rebuilding my rear diff. Now to fix the backing plates that are rubbing against the rotors now. I swear, I’ll install my built up tranny ones of these days
Can’t you just grab them and bend em?
gooffeyguy
Tom
Third row is actually the cargo liner that covers under the 3rd row seat and sticks out the front and extends to the back of the 2nd row bucket seat base. Then the aisle runner covers the center between the 2nd row seats up to even of the front of the bucket seat bases
2001 Yukon SLT
2012 Yukon XL Denali
2011 Yukon Denali RIP 5/20/18
Sent from my SM-G930V using Tapatalk
sumo
dn ʇǝƃ ʇuɐɔ & llǝɟ ı
Already did. THis was a boneyard axle so it sat on the ground so it all bitched up by the parking brakes. Gonna have to remove rotors and do some modifications in that area
bigrhino
Full Access Member
New tires and rims.
Finally home from plastic surgery!, now I just have to wait for it to get dark so I can adjust the headlights and fogs
I guess they must have adjusted the lights too didn't have to even give them a twist
sumo
dn ʇǝƃ ʇuɐɔ & llǝɟ ı
Took my coworker out for a spin that never rode in it before. Track and stability off mashed the gas on the corner and got it sideways. I don’t think he’ll ever ride in it again after that. Lol
iamdub
Full Access Member
What rear diff you have?
A rebuilt one....
sumo
dn ʇǝƃ ʇuɐɔ & llǝɟ ı
Without looking I wann say rpo GT4
3.73 I believe
97audia4
Full Access Member
- Joined
- Jun 19, 2018
- Posts
- 208
- Reaction score
- 190
Killed the alternator today, so now I have to wait until tomorrow morning when advanced or napa opens up and quick throw one on in my driveway and rush into work
Friday, went from 2 10" infinity Reference subs in the back to 1 RF Punch 2 12" between the 2nd row Captain's chairs. See build thread:
https://www.tahoeyukonforum.com/thr...-thread-retroactive.99470/page-4#post-1267092
Shout out to @kbuskill
https://www.tahoeyukonforum.com/thr...-thread-retroactive.99470/page-4#post-1267092
Shout out to @kbuskill
Question about floor mats: is the 07 Escalade floor/ Chair layout the same as the 07 Tahoe/Yukon? Found some custom floor mats for the Escalade, but they have not tested them in the Tahoe / Yukon. Need to know for all 3 rows and back.
swathdiver
Full Access Member
Should be, they were all built on the same chassis.
