Tubular trailing arms!!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

xjayx

Member
Joined
May 11, 2009
Posts
61
Reaction score
13
Location
Hawaii
Hey everyone, its been a while and a few cars since ive posted on here. But ive got two suvs and I just did some trailing arms on both of them. I had sphon arms on my escalade and they were good but I was looking for other options. I bought some GM A body control arms and they are a damn perfect fit on our suvs. Some one chime in if this is something thats already been covered. The lengths of the A body arm is identical to our trailing arms at 22" the bushing is 3/16" narrower on the A body so I put washers on both sides of the bushings to take up the space. All in all it was a good fit and gives more options when looking for trailing arms. I bought black arms without the swaybar mounts so there would be no extra holes in the arms. Ive attached some photos of my 2017 yukon xl with a 3/5 drop and the A body arms installed and the other is my 05 suburban that has a 8" suspension and 2" body lift on 35" tires.20211004_144753.jpg20211004_144641.jpg20211004_144617.jpg20211004_125913.jpg20211004_124343.jpg
 

Imlow78

Full Access Member
Joined
Sep 29, 2021
Posts
122
Reaction score
179
Cool. I’m looking at fabricating some with heim joints and out of 4130 chromoly tubing along with doing the pan hard bar as well for my 05 z71.

Shannon
 

STORMIN08

Full Access Member
Joined
Nov 21, 2011
Posts
974
Reaction score
459
Very good info to know...if one is knowledgeable about other vehicles...it can make finding parts a little easier.

i have commented many times about the need to fabricate needed parts ( and i usually do in some cases), but most dont have the ability


i am guessing the joint angle was good and no bind at the bushing ( doesnt appear to be), and if you have looked into the upper arm as well ???


i may need to do this for a more rugged look. i really like the currie arms
 
Last edited:

gat0r

Full Access Member
Joined
Dec 11, 2015
Posts
3,106
Reaction score
5,828
Location
DFW
I ran billet Curries made for GM A-body, pictured next to the Sphons. For more of an off-road style, they make them for Jeep Wranglers that are close to the same length with adjustable joints and replaceble skids.
View attachment 352048View attachment 352049

I looked. Sounds like more or less intended for racing? The 454 is only about 230HP (on the high end). It’s just a street truck for us. No desire to make it fast. Just looking to bump the MPGs down at highway speeds.

I’m going to price out the 4L60 as well.



given those are shorter... do they change the pinion angle &/or move the tires forward in fender wheel?
 

swathdiver

Full Access Member
Joined
May 18, 2017
Posts
19,100
Reaction score
25,027
Location
Treasure Coast, Florida
Hey everyone, its been a while and a few cars since ive posted on here. But ive got two suvs and I just did some trailing arms on both of them. I had sphon arms on my escalade and they were good but I was looking for other options. I bought some GM A body control arms...
When you say A-Body, do you mean the 64-77 GM cars like the Chevelle and GTO?
 

Forum statistics

Threads
128,786
Posts
1,805,372
Members
91,765
Latest member
AT4Hunter

Latest posts

Top