-
-
STORMIN08 replied to the thread Body panel adhesive?.those are just push to insert tabs...go give it a bump and see if they reattach -
STORMIN08 replied to the thread SOLVED - No start, dash icons illuminated & numerous service messages.very good to know, just had a similar issue...although mine was a failed battery...but i do get that same side detection notice (twice...
-
-
STORMIN08 replied to the thread Diff gear questions.that is a loaded question a decent brand rear gear and install kit, probably 400 ish in parts...then labor where as a salvageable rear...
-
STORMIN08 replied to the thread How would you test drive a 2015 Yukon with 102k?.as always...drive it like you stole it. common items again...ball joints, control arm sqeaks...ect, all easy fixes and relatively...
-
STORMIN08 replied to the thread New fog lights.Any other Info on the bulbs ? Brand, base style etc...
-
-
STORMIN08 replied to the thread Diff gear questions.Standard is mostly 3.08 Z71 had a 3.42 option. Aftermarket for anything else You may want to look into a convertor before gears it is...
-
STORMIN08 replied to the thread Airaid jr intake tube.I will say this, I still want the MIT for appearance, I think it looks better. But I made very similar gains just by trimming the...
-
-
STORMIN08 replied to the thread 275-70R18 Goodyear Duratrac 3” lift.Time to trim that lower valance....makes it look 2" higher. Love the combo also...but I am partial at the moment. This is a 2.5/1.5 combo
-
-
STORMIN08 replied to the thread MZS 1.5” level kit on ‘22 tahoe high country.Could the lower mount bolt be flipped ? Might be slightly tougher to install, but would have more clearance.
-
STORMIN08 replied to the thread Tahoe PPV Deflector installed on 15 Suburban (shorter lower valance that comes on Police model).if i recall, there are slots that the tabs insert into...when you remove, you have several visible slots across the lower front bumper...
-
STORMIN08 replied to the thread Flickering Morimotos.i agree, any issue i have had has been long removed after a quick check, re-grease of the plug and reinstall...until several thousands...
-
I've had several issues with LEDs over the years, the most irritating being flickering caused by the bulbs themselves. I finally figured...
-
-
Loading…
-
Loading…
