Rocket Man's 02 Denali Build Thread AKA "THE BEAST"

[Tonyrodz]

x2

Yes. Just to get all the silicone based cleaners and all the other crap out of there. Adhesion is key.

 

[Rocket Man]

So, Mark, you're using lacquer thinner as the "wet" for wet sanding? I need to do this to mine.

Yes. Combined with scotchbrite and laquer thinner to start with because that strips the painted part completely but won’t remove the wood grain. It does seem to strip the shiny layer on the wood grain, then I wet sand the whole thing with 220 and the thinner.

 

[Rocket Man]

Reinstalled the handles and emblem. The dog helped.

 

[Rocket Man]

Found out that if I keep the surface of the wood grain wet with lacquer thinner long enough it comes off. It’s like a film with clear over the top. It’s not too bad to remove with scotchbrite and thinner. I got everything except the main dash bezel stripped and painted today. They’re drying now.

 

[HiHoeSilver]

Actually the Fusion is kind of a complimentary color to the exterior.View attachment 244604

Very much, imo.

 

[ivin74]

Reinstalled the handles and emblem. The dog helped.

View attachment 244683 View attachment 244684 View attachment 244685 View attachment 244686

Mark,
Did you use rattle can clear coat? If you did what type/brand did you use?

 

[Rocket Man]

Mark,
Did you use rattle can clear coat? If you did what type/brand did you use?

SprayMax 2k, it’s a 2-part in a can. Once you hit the mix button you have like 24 hours to use the can.

 

[Rocket Man]

Shit came out pretty good.

 

[Rocket Man]

I didn’t think about the speaker grills. Now I have to pull the door panels and paint them.

 

[Rocket Man]

Console looks better by far. I’m in process of stripping the main dash bezel but it’s taking awhile. Speaker grills are being painted.