5strmtrp
Full Access Member
- Joined
- Jul 28, 2019
- Posts
- 365
- Reaction score
- 384
Replaced my rear springs & shocks on my ‘14 SSV . Replaced them with Belltech 2” lowering springs stock shocks with relocating shock mounts and smaller bump stops.
The springs are rubbing the side of the mounting area on the axle side.
Ass-U-Ming that I need to move em a bit?? I’ve done this job a few times on other trucks and cars but have never had this issue.
suggestions welcomed! Simple dumb arse response if I’m correct on the above!!!
Thanks
Paul
The springs are rubbing the side of the mounting area on the axle side.
Ass-U-Ming that I need to move em a bit?? I’ve done this job a few times on other trucks and cars but have never had this issue.
suggestions welcomed! Simple dumb arse response if I’m correct on the above!!!
Thanks
Paul
